Turning TV on with Fios remote changes receiver input

We have an LG TV, Fios DVR box, and a Denon receiver. When we turn the TV and STB on with the Fios remote, the receiver switches input off of the cable setting (although it takes 10-15 seconds for it to do so). Is this a problem with the remote, the STB, or the receiver ? Any ideas how to fix it ? Thanks.

Accepted answers

clem21

Ok, try this: on the Denon menu, setup, video, HDMI setup, TV audio switching, turn OFF. That should do it.

All comments

clem21

You need to switch off "TV input control" in the audio and video, video settings menu on the cable box.

TomH121

Hi fiosuser43

It would be extremely useful if when you answered you also included

Equipment Model Nos. ?

Remote

Set Top Box DVR

Receiver

If you are the original poster (OP) and your issue is solved by clem53, please remember to let all of us know and click the "Accept as Solution" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

fiosuser43

Very helpful, thanks - only I don't have that setting. Under Audio $ Video/Video Settings, I only have settings related to the TV format. I'll look for TV input control under other menus.

clem21

Which box are you using? The 4100 or an older box?

clem21

Ok, try this: on the Denon menu, setup, video, HDMI setup, TV audio switching, turn OFF. That should do it.