G1100 with a WCB6200q

Currently, I have a G1100 in my living room with ethernet and coax connected (for Fios TV) to it and an old WCB3000N in my basement, essentially just acting as an ethernet switch. It only gives me like 130mbps, but understand thats because its Moca 1.1 and my G1100 is unbonded 2.0.

What was hoping to do is buy a WCB6200Q secondhand and use it in place of the WCB3000N have. Would this then give me about 500mbps via ethernet port? My intention was to do that for now and then at some pt get an ECB6200 to connect to my G1100 so that l'd get 1gbps from that WCB6200Q downstairs.

Is that thinking sound?

Accepted answers

Cang_Household

By incompatibility, I mean if you were to add MoCA 2.5 adapters in the future, WCB6200Q and ECB6200 won't recognize MoCA 2.5 at all. There are firmware updates getting around this, but users have reported packet loss that interferes with normal use.

The FNA is indeed bonded MoCA 2.0, but I believe it uses a different chip than BCM6802, so there won't be a compatibility issue with newer MoCA 2.5. I have tested this in my mini Fios lab.

To dexman:

I think we should create a MoCA compatibility matrix for other customers' convenience.

All comments

Cang_Household

WCB6200Q and ECB6200 have compatibility issues with newer MoCA stands, so they should not be used in new installations.

If you are looking your gigabit or higher over MoCA, you can buy Fios Network Adapter sold at $55 each or MoCA Ethernet Adapter sold at $99 each. Both of these devices give you four wired Ethernet ports.

These devices won't give you WiFi though. If you want WiFi along with some Ethernet ports, you might want to consider E3200 at $199.

If you want to subscribe gigabit speed, right now the plan includes a free rental of G3100 and E3200. This offer may expire this month.

Bwangster12

Not totally clear what this means...newer moca standards. You mean if I was adding 2.5 or something than my g1100 and wcb6200q wouldn't be compatible?

pacmusicman

Essentially the combination won't be able to support gigabit speed service. The extender is particularly lacking at this juncture.

Bwangster12

I understood that the extender with my G1100 won't supply gigabit speeds...but if I got a bonded 2.0 adapter to bypass the G1100, then the WCB6200q would provide closer to 1 gig spends.

pacmusicman

The suggestions posted by Cang_Household would yield the most favorable results. The extender won't support the high speed. The converter will...and...offers four Ethernet ports to boot. 🙂

Bwangster12

I get it, but those are a fair bit more expensive than the $20 WCB6200q I can buy. Just trying to get confirmation if I will in fact get about 450mbps hardwired with a G1100 and WXB6200q and then if I added a bonded 2.0 adapter to bypass the G1100 would I get almost 1 gig.

If the network extender for $55 you recommended and the wcb6200q are both bonded 2.0, won't they accomplish the same thing?