Had an old set up through coax, dropped TV and upgraded internet so, new ONT was needed and needed to be switched to ethernet. RJ45 wall plates had been installed already in home since it was built (with cat5e cables inside walls) one was converted over to RJ11 for phone line with first install 2013...
Tech was here and decided to use that wall plate with RJ11 and RJ45 jacks since it was closest to where I wanted router to be, but then had many issues trying to get it to work. Finally she ended up taking the cat5e that was used with RJ11 and repurposing that cat5e cable and splicing it to her own with RJ45 end needed for router (see picture) then leaving me with a coupler just dangling inside wall, completely disregarding the wall plate that was install...due to a "broken connector on it" (I later confirmed and this was the case, but she had tried so many times, she probably broke it in the first place) in any case, I figured I could just get a new wall plate and manage myself later, but still not sure why she spliced this cable like that. Do they not have their own connector and crimping tools? also even though I got rid of the phone line I was told that in NYC they are suppose to leave you a dial tone for emergencies, but she undid my RJ11 and never put it back, because she used that cable to make her frankenstein cable...
Any one know if the whole dial tone for emergencies thing is true...if so, any way I can repurpose the other cat5e cable in the wall to the rj11 wall plate connector (wish i had taken a pic before she took it apart)...
I'm glad she did the upgrade and got it to work also glad they waved the "upgrade fee", but man, this is really low standards for such a major telecom company...little disappointing... Any who, any ideas about getting my dial tone back are appreciated. Thanks
