I got Verizon 5G last month, and set it up for passthrough via a Google Mesh network with 3 nodes. At the time, I was able to connect directly to the router with an Ethernet cable to LAN 1 and 192.168.0.1. Speedtest showed a healthy ~250 Mbps through my google mesh network, and the native Verizon wifi network ceased to be visible (this is what I expected).
I noticed today that my speeds were _way_ down (~12-13 Mbps) and that the Verizon network was once again visible. I tried to connect an Ethernet cable again, but I can no longer log into the routers WebUI.
What should I do?
We're sorry to hear that you're having problems with your 5G Home Internet. We want to make sure were doing everything we can to help you. We're going to send you a Private Note so we can assist.
~Jesse
I had that happen to me a few months back after a firmware update to the gateway. I had it setup similar in passthrough mode and accessing it through the 2nd LAN port. I could not access it in any way after the firmware update and ended up having to do a factory reset on the gateway and set it up again.
Start a new topic or ask questions in the open forum.
