Skip to main content
Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
cancel
Showing results for 
Search instead for 
Did you mean: 
VZAccess error code 628
Ed_ward
Member

I got a error code 628 disconnected by remote computer when I shut down my tether on my bb Bold what up with this ?

 

Labels (1)
0 Likes
Re: VZAccess error code 628
StreetDocRN
Leader
Leader

Hi,

 

I searched and found this information regarding error code 628:

 

  This is most likely a modem or phone line noise issue or blocking port issue.

Error 628:  The port is disconnected or The conenction was terminated by the remote computer before it could be completed..

Resolutions:
1) make sure you have good phone line.
2) Upgrade the modem/router firmware

3)
Make sure you logon using the correct username or password or try different username.
4) Reinstall the modem.
5) Re-enable RAS
6) Check the router/firewall settings.
7) Make sure the router is VPN pass through or GRE is enabled.

 

Hope this helps,

Doc

0 Likes
Re: VZAccess error code 628
Ed_ward
Member

Hey Doc

 

         Thank you for your reply noise is probably it. I was hook up on a tether and was just clicking on the disconnect

button before shutting down vzaccess and got the error code

 

 

                                     Thanks again DOC

 

                                                         Ed

0 Likes
Re: VZAccess error code 628
StreetDocRN
Leader
Leader

Hey,

No problem.  Usually line noise is the biggest culprit for a disconnect.  Anyways, if it continues to give you a problem, let us know.  Good luck, and thanks for using the forums.

Doc

 

0 Likes