Usually when you are in a call you have a button that says "Add" and this will allow you to dial other caller and then when connected the button usually turn to join and when this is pressed the calls will enter 3 way calling status..
That correct Wildman. Thanks for the information. I have also listed steps below along with a link to information about three way calling on our website.
4.To end both conversations completely, press the End key.
http://support.vzw.com/clc/features/calling_features/3_way_calling.html
| 1. | While on the first call, dial the 10-digit number of the second person. If traveling and the instructions do not work, press Send before dialing the number of the second person.
| 2. | Press Send and the first person is automatically put on hold while the call is made.
| 3. | When the second person answers, press Send to create a conference call. If the second person does not answer, press the Send key twice to end the connection and go back to the first person.
|
Start a new topic or ask questions in the open forum.
