I recently received a replacement battery for the Verizon backup unit. I am supposed to remove the red and black wires from the old battery. But they do not come loose, even with hard pulling. What's the secret?
Solved! Go to Correct Answer
Take meaty part of your palm against back of battery opposite the terminals. Use your 3 middle fingers to pull the leads off. Dont be scare to break them. They will come with some force.
@owengleach1 wrote:I recently received a replacement battery for the Verizon backup unit. I am supposed to remove the red and black wires from the old battery. But they do not come loose, even with hard pulling. What's the secret?
Use needle nose pliers.
If you place the front of the pliers towards the battery nubs, then pull straight back.
this way you have the leverage to pull off the terminals.
Take meaty part of your palm against back of battery opposite the terminals. Use your 3 middle fingers to pull the leads off. Dont be scare to break them. They will come with some force.
@Edg1 wrote:Take meaty part of your palm against back of battery opposite the terminals. Use your 3 middle fingers to pull the leads off. Dont be scare to break them. They will come with some force.
Versus being careful via removing with needle nose pliers. Why break something if you don’t have to?
Pliers are way overkill. You just need a little leverage to pull off the leads. You have more chance of breaker on of the leads with pliers. They asked how to get them off so I told them.
@Edg1 wrote:Pliers are way overkill. You just need a little leverage to pull off the leads. You have more chance of breaker on of the leads with pliers. They asked how to get them off so I told them.
Hands may work (fingers) but it is better to have a controlled grip on the terminal leads than to put fingers on and possibly yank the terminal leads off, or even cut your fingers.
No. Its not. There zero need to use pliers to take those leads. If fact the plastic cover on the positive lead is very easy to break if you were to use pliers
@Edg1 wrote:No. Its not. There zero need to use pliers to take those leads. If fact the plastic cover on the positive lead is very easy to break if you were to use pliers
You can put your fingers on the connectors and rock them back and forth and there is still a chance to break them completely off. This in affect will result in yet more repairs.
in my tool kit I have small needle nose pliers and they remove from terminals quite easy and without damage.
What ever man. If you want to use pliers then use them. You dont need but do what you want.
Start a new topic or ask questions in the open forum.
