I recently installed a G-3100 as part of a plan upgrade.
I have two wi-fi networks in my home. The G-3100 provides one and an Apple Time Machine (backup disk for 3 computers) is the second. All wi-fi devices in the home are Apple except our printer and stereo receiver. The only device that can take advantage of the 802.11ac speed of the G-3100 is my 2020 Macbook Air, all other devices can only connect as 802.11n which is the max speed of the TM network.
I have set the G-3100 network as the default for my laptop, all other devices only connect to the TM network. However, I often find the laptop has switched over to the TM network, suggesting it has lost the connection to the G-3100. Once connected to the TM network, it never switches back by itself.
Verizon touts the wider range of the G-3100 but I'm finding the exact opposite to be true. Anybody out there run into this and found a solution other than buying an extender?
#1 While we get that you have FIOS Internet, do you also have FIOS TV?
#2 You need to set it to use a static Wi-Fi channel if it is not already and try to avoid overlapping channels.
#3 As far as 2.4 GHz concerned the only channels that do not overlap are 1, 6 and 11 with comments about outside of the USA.
#4 By that, I mean outside of the USA depending on where you go to there is/are other channels above channel 11. And since you are in the USA, that does not matter to you right now.
#5 So a Wi-Fi scanner to see the channels that you are in use, is a good idea to get one.
" You need to set it to use a static Wi-Fi channel"
Which it are you referring to, the TV settop box or the laptop?
If the STB, how would I do this?
@hubcapbrian wrote:
" You need to set it to use a static Wi-Fi channel"
Which it are you referring to, the TV settop box or the laptop?
If the STB, how would I do this?
In the router, you set it to use a static channel. Then with clients they will use the channel that the router tells them to use.
Start a new topic or ask questions in the open forum.
