Can't make voip calls 5060 blocked?
srkam
Newbie

I can't make voip calls

rkmac-wl:~ rkaminen$ telnet jfk-primary.voicepulse.com 5060
Trying 64.61.93.190...
^C
rkmac-wl:~ rkaminen$ telnet jfk-backup.voicepulse.com 5060
Trying 67.108.9.165...
^C

rkmac-wl:~ rkaminen$ ping jfk-primary.voicepulse.com
PING nycproxy02.voicepulse.net (64.61.93.190): 56 data bytes
64 bytes from 64.61.93.190: icmp_seq=0 ttl=47 time=16.363 ms
64 bytes from 64.61.93.190: icmp_seq=1 ttl=47 time=16.008 ms
Request timeout for icmp_seq 2
64 bytes from 64.61.93.190: icmp_seq=3 ttl=47 time=17.725 ms
^C

I can ping my voip provider but can't reach port 5060

Is verizon deliberately doing this?

0 Likes
Reply
2 Replies
srkam
Newbie

Its working again and I don't know who to blame either my voicepulse service provider or verizon.   All of a sudden i don't have dial tone for 20-30 minutes.

Voicepulse is small company and I trust them but verizon could be blocking 5060 to steal other customers to its phone service.

Mischeif maker.

srkam

0 Likes
Reply
Bob_Robertson
Specialist - Level 1

verizon doesnt block that port....

if it was down for 30 mins, and internet was working at the time.. it is most likely that the VOIP was at fault

0 Likes
Reply