An Accepted Solution is available for this post.
DLNA not working again on 40.20.1? (MI424WR Rev. I)
aforty
Enthusiast - Level 2
‎04-19-2013 05:01 PM

This again...

I can't get DLNA/AirPlay working for the life of me. Had the problem, as many of you did, with 4.19.36 but it was fixed by disabling IGMP Proxy (through http://192.168.1.1/index.cgi?active_page=6059). Now with 40.20.1 it again doesnt work and disabling IGMP Proxy has no effect at all.

 

Anyone else experiencing this? Anyone have anything I can try? I'm at a complete loss.

0 Likes
3 Replies
An Accepted Solution is available for this post.
aforty
Enthusiast - Level 2
‎04-25-2013 05:39 PM

Can anyone please help? Smiley Sad

0 Likes
An Accepted Solution is available for this post.
aforty
Enthusiast - Level 2
‎08-01-2013 04:12 AM

Jebus **bleep** christ, this again?! Can we have one **bleep** firmware upgrade where this works properly?

My AirPlay is not working, again. Unbelievable...

0 Likes
An Accepted Solution is available for this post.
smith6612
Community Leader
Community Leader
‎08-01-2013 10:47 AM

Try toggling UPnP on or off:


http://192.168.1.1/index.cgi?active_page=900

There's also a checkbox on the Rev. I somewhere, and I can't seem to search up where it is at the moment, labeled "Hardware Acceleration" under the network settings. If this box is unchecked it's been known to cause issues as well. See if you can locate that somewhere in the router and enable it.

EDIT: Found it. Go to the Network Connections page on the ActionTec (My Network > Network Connections) and select Network (Home/Office) Properties and it's associated edit button. You'll see something labeled "Bridge Hardware Acceleration."

Source: https://secure.dslreports.com/forum/r28351667-New-option-in-Actiontec-Rev-I-Bridge-Hardware-Accelera...

0 Likes