G3100 and G3200 using MoCA
murray978
Newbie

I have a G3100 connected to the ONT via ethernet and coax.  I am trying to get a G3200 extender working via MoCA.  Is this possible?  On the G3200 I get a solid yellow light on the front.  The Coax light on the back is solid green.  The coax line I am using works for Fios STB.  Any thoughts?  Thanks.

0 Likes
3 Replies
Edg1
Community Leader
Community Leader

Should be just plug and play. Try connecting the G3100 and E3200 directly to each other with a coax jumper. This will rule out possible wiring/splitter issues. 

0 Likes
MBNYM86
Newbie

Were you able to use the STB Coax connection and split it for the extender over coax?  or did you need to run a new cable?  Hopefully not.

0 Likes
charlyc
Enthusiast - Level 3

You should be able to use the included splitter so you can locate the E3200 extender anywhere you have a coax outlet even if you have a TV at the location. It should be plug and play but if you have any problems just reset by using a paperclip on the button in red on the back of the extender and wait until the light stops blinking and you get a solid white. 

0 Likes