- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Verizon Community,
I have been having difficulty with connecting to some 3rd pary equipment over WiFi, The equipment is hard wired to the Verizon ActionTec model/router model # MI424WR Rev. 1 via ethernet. We are able to discover the equipment and program it when wired to the router with our PC. When connect with the PC or mobile device over WiFi we are unable to discover and connect despite being able to identify and ping the IP address of equipment on the network.
With other routers we do not have this issue, and we have narrowed it down to a conflict with IP Multicasting being disbaled on the FiOs router.
The only setting that we can find to change / enable mulicasting was found in the router menu by going to:
192.168.1.1 via internet browser
-> Logging in
-->Click Advanced Tap
--->Accepting warning
---->Click routing
----->Checking IGMP setting / or unchecking it (doesn't seem to help either way)
Is there a setting / menu on the Verizon ActionTec MI424WR router that I am simplly not able to find or is hidden that will enable IP Multicasting over wifi?
Solved! Go to Correct Answer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Login to your router. Then, click here:
Then, set "IGMP Proxy" to disabled.
Yes, this is a hidden page on the latest firmware.
Enjoy!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Login to your router. Then, click here:
Then, set "IGMP Proxy" to disabled.
Yes, this is a hidden page on the latest firmware.
Enjoy!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Can someone out there help me? I have no idea how to do this. The link below doesn't work
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@ALieblein wrote:Can someone out there help me? I have no idea how to do this. The link below doesn't work
The thread is over 5 years old.
start a new thread to get up to date exposure.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
how do i start a new thread
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
At the top of the Internet Forum choose new message.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As this thread is now over two years old, it will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.