An Accepted Solution is available for this post. Jump to solution.
IPv6 Routing settings
YoMomma1
Enthusiast - Level 1
‎01-05-2019 12:25 PM
 
In my Verizon FIOS G1100 router web page (http://192.168.1.1) I have enabled IPv6 using the IPv6 Configuration Control page.  
 
What do I enter in the below Routing page for IPv6 settings (Destination Prefix and Gateway)?
 
Route Settings
Routing Entry:
         IPv4         IPv6       
Name:
Network (Home/Office)
Destination Prefix:
Gateway:
Metric:
Apply Cancel
0 Likes
1 Solution
An Accepted Solution is available for this post. Jump to solution.
smith6612
Community Leader
Community Leader
‎01-05-2019 01:22 PM

This information should only be populated if Verizon provides a static IPv6 block to you. Set your router to use Stateless DHCPv6 for IPv6. If IPv6 is enabled on your area, the router should pull an IPv6 block shortly and begin assigning addresses to your devices.

View solution in original post

2 Replies
An Accepted Solution is available for this post. Jump to solution.
smith6612
Community Leader
Community Leader
‎01-05-2019 01:22 PM

This information should only be populated if Verizon provides a static IPv6 block to you. Set your router to use Stateless DHCPv6 for IPv6. If IPv6 is enabled on your area, the router should pull an IPv6 block shortly and begin assigning addresses to your devices.

An Accepted Solution is available for this post. Jump to solution.
YoMomma1
Enthusiast - Level 1
In response to smith6612
‎01-06-2019 05:05 AM

Smith6612......thank you for the IPv6 information.