Moderate to open back and forth NAT issue
mcwireless
Newbie
I'm trying to play on Xbox Live but I've been having to reset my router everyday to create an open Nat. I've talked with customer support for Verizon and Actiontec. Verizon set me a new router, which solved nothing, but aside from this I've not been able to reach someone who could understand port forwarding or why I would want to do it.

My issue is that I would like to forward the necessary ports once, keep them forwarded, and not have to reset (sometimes to factory specs) every day. To be clear, I've set up the forwarding but it is as if the router does not recognize the parameters until it is reset. Sometimes my nat will change during the middle of gameplay as well. This has been very frustrating so any help you can offer would be great because I'm not getting it from the phone techs.

Specs:
Actiontec MI424WR rev. l. firmware:40.19.36
Xbox 360 wired to router
Fios 75/35
Ports Forwarded 3074 both, 53 both, 80 TCP, 88 UDP (yes they are set up correctly)
Static IP set (yes it is set up correctly)

Additionally, Xbox Live's website notes a bug in the MI424WR that causes nat switching. The solution is to go into the upnp settings, however, access to upnp is not available in rev. l's firmware.

http://forums.xbox.com/xbox_forums/xbox_support/networking-hardware/01-modems-gateways/actiontec/f/3...
0 Likes
1 Solution
dslr595148
Community Leader
Community Leader

From http://forums.verizon.com/t5/FiOS-Internet/mi424wr-gen3g-with-hardware-version-g-doesn-t-have-upnp/t...


UPNP was hidden in this release software.  Fortunately it's there, but you have to know the direct URL.

Firmware 4.19.36

 

 

 

UpNP hidden Menu

http://192.168.1.1/index.cgi?active%5fpage=900

IGMP proxy Hidden Menu

http://192.168.1.1/index.cgi?active_page=6059




View solution in original post

2 Replies
dslr595148
Community Leader
Community Leader

From http://forums.verizon.com/t5/FiOS-Internet/mi424wr-gen3g-with-hardware-version-g-doesn-t-have-upnp/t...


UPNP was hidden in this release software.  Fortunately it's there, but you have to know the direct URL.

Firmware 4.19.36

 

 

 

UpNP hidden Menu

http://192.168.1.1/index.cgi?active%5fpage=900

IGMP proxy Hidden Menu

http://192.168.1.1/index.cgi?active_page=6059




Hubrisnxs
Legend

I am pretty sure the Verizon routers are immune to this, but it's worth checking.   I think this is the reason they hid the option.

 

Steve explains the UPnP vulnerability in the YouTube video at 
 

The bug is that UPnP is unnecessarily exposed on the WAN
side of the router, when it only really makes sense on the
LAN side. Hopefully the Actiontec doesn't have this issue,
but curious as many routers have this flaw. It should never
be available for negotiate on the WAN side, but it is on
many routers. Hope this isn't an issue with the ActionTec,
but if it is on any model, please report! Verizon will want
to know that. Hopefully not...

Here are the details about it:

There is an entire TechGuy Podcast about it would explains
the flaw. But a quick explaination can be found here:



Steve Gibson, Security expert wrote this quick test.

Quick Test:

Click ShieldsUp!, then scroll down to "UPnP Exposure Test!"
and then "Proceed" and you want to run the UPnP Exposure Test





 

THE EQUIPMENT AT THE TARGET IP ADDRESS
DID NOT RESPOND TO OUR UPnP PROBES!
(That's good news!)
0 Likes