- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a G1100 Quantum Gateway connect to the ONT via coax. We use FIOS internet only . . . no TV. I was told by the Verizon rep that I cannot upgrade internet speed to fast than 100Mbps in this configuration. The rep further said that a tech visit was necessary to change the ONT from coax to ethernet, and yet I read here that many times this change can be done remotely.
My ONT is i-211-M-K. Any reason that unit wouldn't work for up to gigabit speeds? The Verizon rep, via chat, said a tech has to come out "because of how it's wired". I'm thinking I could just run a cat5 or cat6 cable from the ONT to the router then call them and tell them to turn on the ethernet.
If a tech visit is necessary, then ok. But it's expensive, so I'd like to be sure.
Appreciate input.
Solved! Go to Correct Answer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I would go ahead and run the ethernet cable.
Then contact support (you may get more timely support by using twitter @verizonsupport They should be able to let you know if everything is in place for upgrade. And then actually do the migration from coax to ethernet.
From there, you should be able to order the upgrade
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
So I found info on that ONT. Looks like it should support Ethernet at faster than 100Mbps.
Alcatel | I-211M-K | SFU | Interior Desktop Exterior | 1: MoCA | 1: 10/100/1G Ethernet | 2 |
So I think now that I can run an ethernet cable from the ONT to the G1100. Then call and have ethernet activated. At that point, I could upgrade my speed or change to a different router. Anything else to be aware of?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I would go ahead and run the ethernet cable.
Then contact support (you may get more timely support by using twitter @verizonsupport They should be able to let you know if everything is in place for upgrade. And then actually do the migration from coax to ethernet.
From there, you should be able to order the upgrade
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
In order to keep discussion on the community current, this topic has been locked to prevent new replies. If you have a similar question or issue that you wish to discuss, then please feel free to post a new message on the most relevant board. Thanks!