DVR capacity
Danny
Newbie
After erasing all recorded movies from DVR, I check Recorder Status and see "16% used", 84% free". I thought maybe 16% of memory is used to store data regarding Schedule. Then I deleted all schedules to see what happens. It still says the same, i.e. 16% and 84%. How come? Anybody pls explain, thanks.
0 Likes
Reply
14 Replies
speedo123
Contributor - Level 1

Don't know the answer to your question but ran into a "Status" problem also.  My 6416 said it had two hours of HD programming recorded.  I don't yet have HD TV's so would not have recorded any HD shows.  When I went through the Recorded Programs listing so I could erase whatever this was and regain the 2 hrs of space, I didn't find anything to erase.  My thought then was that, as this is an HD DVR, maybe the operating system needs to have something on the drive to record correctly or whatever.  I've just replaced this unit with another 6416 that Verizon sent me to solve another problem.  When I checked Recorder Status while setting up this new box, it said 0% recorded.  So my theory about the 2 HD hours recorded has to be wrong.

In any event, these two problems seem to show that the FIOS operating system will not always show you everything recorded on the disk or allow you to completely erase what's on it.  Does anyone know how to completely clear a disk or to find out how to view all of what's recorded on it?

0 Likes
Reply
Danny
Newbie
Any experts of Verizon around? Pls clarify this question for us. Thx.
0 Likes
Reply
Justin46
Legend

I just did a quick search on this site for "erase dvr" and found the following thread:

http://forums.verizon.com/vrzn/board/message?board.id=FiOS_TV&message.id=362&query.id=25340#M362

I have never used the procedure so I cannot verify that it works, or that it will do what you want, but you might try it - pay attention, though, it supposedly will erase everything on the hard drive.

Good luck.

 __________________________________
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.0, Build 06.89
Keller, TX

0 Likes
Reply
speedo123
Contributor - Level 1

Thanks Justin.  Looks like that'll get your drive back to zero.  But does anyone know how to find the "hidden" recorded programming?  Otherwise, you'll have to erase a lot of recorded material that you probably still want to keep.  If you could locate and erase just the stuff that you don't want, it would of course be better.  And that's supposed to be the way it should work anyhow.  So, it appears to be another glitch we need a workaround for.

Is Verizon aware of this problem & does it have a solution other than a complete disk wipe?

0 Likes
Reply
mrags2000
Enthusiast - Level 3
Verizon is aware of issue. appearantly is a glitch between IMG and fragments on hard drive. Should be fixed w/ 1.7.
0 Likes
Reply
Telcoguru
Master - Level 1
The post that Justin linked you to will clear the DVR back to 0%. A few of my customers tried it and it worked.
0 Likes
Reply
Danny
Newbie
I am concerned that if I do so, there might be "side effects" that I dont know because obviously, that way of fixing is not a proper way. Probably we will have to wait for 1.7 but when? A few months ago, I raised the "too soft picture" problem w 1.6.0 and was told that 1.6.1 would get rid of it and that 1.6.1 would come soon, by the end of 2008 but so far nothing yet. Now we talk about 1.7. I am not sure if Verizon management knows of their "valued customers" problem??
0 Likes
Reply
CharlesH
Specialist - Level 1

To format or Clear the Hard drive dor the following...

1. Access the Diagnostics menu (Press Power (off), Select, Select )

2. Replay (the Left curve arrow), DVR, DVR, DVR, FiOS TV

3. Press another button and the LED will display Clr. Exit the Diagnostics menu and turn on the STB. The LED will display 8888, go through a boot cycle and reload the UI and EPG. All recordings will be cleared in the Cardiff IPG. All recordings and scheduled recordings will be cleared in the IMG IPG.

We do not suggest doing this without the consent of an employee, but if you feel like you need to do this, there's the steps you need.

0 Likes
Reply
squatch1969
Newbie

I tried those directions several times last night with no luck (the display never changed to CLR etc).  I still had zero programs listed but with 12% used capacity.

My wife suggested a reboot of the 6416 and, voila, it cleared the drive and listed 0% and now I am happy for a heavy week of new series episodes this week.  Smiley Wink

0 Likes
Reply
Danny
Newbie

I tried steps provided by charlesH but it did not work. I was quite confused and did not want to go further as I was afraid that the whole things won't work.

squatch mentioned that reboot was working well. How to reboot it properly?? I imagine that reboot means unplug power cord, wait few seconds then plug again. Am I right or wrong? Anybody pls confirm this. Thx.

0 Likes
Reply
CharlesH
Specialist - Level 1
A proper powercycle is to unplug the cable box for 90 seconds then plugging the power back in.
0 Likes
Reply
Danny
Newbie
Then the box will automatically reset itself ot I have to do something?  tell me pls. thx.
0 Likes
Reply
TheSanchez
Contributor - Level 2

The STB will automatically reset itself and reload all of its modules upon plugging it back in.

TS

0 Likes
Reply
Danny
Newbie
Yes, it works. I rebooted the STB and status now says "0% used and 100% free". The good thing is all schedules are kept, unlike what I imagined before. It means that data for schedules are NOT stored in hard disk. Thx all 4 help. Smiley Happy
0 Likes
Reply