I am connecting the IPC1100 set top boxes using ethernet. When I connect the box to the back of the verizon supplied router everything works great. I then coneect the verizon router to a 24 port Meraki L2 switch and the IPC1100 boxes to the meraki switch, everything works great.
Ok this is what has me dumb founded. If I connect the router to a Cisco 2960X switch running Lan Base and the latest code rev I get no video, but I do get Guide menus and show information.
If I run a show int g1/0/1, (the interface the box is connected to) I can see multicast, boradcast, and data counters going up. I am gettting zero errors.
I made an access list to allow all multicasts in the range verizon uses and am loging the hits and I see it going up. I have tried every possible configuration on the port and no video.
I have tried every IGMP and command I know and still nothing.
How is an enterprise switch not able to support video over ethernet for these boxes?
Does the Cisco switch create a new subnet that the IPCs then are on?
For sure all of the IPCs and VMS have to be on the same subnet.
When it is working, does everything respond fast? For me, the current FIOS Quantum is so bad and slow.
Start a new topic or ask questions in the open forum.
