- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I want to set up my UDM Pro before the Verizon router. My ONT comes into the house via RJ45 and plugs directly into my UDM. I have the FIOS router set as a bridge to get to the set-top boxes which it uses the coax system.
I already copied all the port forwarding rules from the FIOS router and put them into my UDM. I am still however not able to get the video on demand and Guide working on my boxes but the channels play fine.
Data Flow:
ONT -> RJ45 -> UDM -> Unifi Switch -> Fios Router -> Coxial -> STB (1-3)
Devices:
Internal UDM - 192.168.10.1
External FIOS - 192.168.10.30
Internal FIOS - 192.168.1.1
STB1-3 = 192.168.1.111-113
Forwarding rules on UDM:
Any via port 35000-35005 -> send to 192.168.1.30:35000-35005
Any via port 4567 -> send to 192.168.10.30:4567
Forwarding rules on FIOS:
Any via port 35000 -> send to 192.168.1.111:8082
Any via port 35001 -> send to 192.168.1.112:8082
Any via port 35002 -> send to 192.168.1.113:8082
Any via port 4567 -> send to 127.0.0.1
I had the guide working earlier this year and then it stopped working with the same configuration. Do the Port Forwarding rules look good? I have also tried to put the rule directly into my UDM router (Any port 35000 -> 192.168.1.111:8082) and that still does not work. I am able to ping all the STBs from my pc which is 192.168.10.155.
Any help would be appreciated.
Thanks
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi pish180,
I am thinking about doing a similar set up. Were you able to get this working properly?
I currently have ONT > RJ45 > Fios G1100 > Both Coax and Ethernet out
> Coax > STB (and Moca adapters for a couple of things)
> Ethernet > Ubiquiti Switch
I'd like to get a UDM Pro to insert into the mix and a couple of Ubiquiti WAPs
How did it go for you?
Thanks!
Don