QAM tuner cannot detect kcal9
Probably a connection issue. This happens often with Cable TV, and when it does it's normally the coax cable you have threaded on the back of the TV that comes from the outside So I would undo it altogether, And then put it back down as nicely, securely and snuggly as possible. hand tightness is fine. DO NOT touch it and trust that it's ok, make sure to undo it, it takes seconds to do. Also make sure you do it at both ends of the cable, re run the digital channel scan and test it again.
If you have more than one TV - make sure to note if the problem happens in all rooms, or just the one room.
I undid the cables and installed them back, it's still not detecting kcal 9, the other channels are ok. The other TVs I have dont have kcal 9 too.
Start a new topic or ask questions in the open forum.
