Network Extender for Business SCS-2U3100
jgphelps
Newbie

Our company purchased this router and I have been trying to get it to work for 2 months to no avail. I have been told the issue is with our Cisco firewall but I have worked with Cisco TAC to resolve any such issues. The device still has a flashing red SYS light and a magenta GPS light. I can access the device on out internal network and login to it but it will not otherwise work.

Labels (1)
0 Likes
Reply
6 Replies
Monica0805
Newbie

I have the home user one and I'm not through any firewall or whatever they say and have the same problem. Red light on sys.

0 Likes
Reply
vzw_customer_support
Customer Service Rep

jghelps

Two months is a long time. Let's get this resolved. Is your device flashing fast red under system or slow? Is your GPS antenna on the device? What happens when you try to dial #48 from a device? Here is a link with additional steps that might be helpful.  http://vz.to/16B8CEp

JorgeO_VZW

Follow us on Twitter @VZWSupport 

0 Likes
Reply
jgphelps
Newbie

It is fast flashing Red under system. The GPS antenna is on and I have it next to the window for days. Once I took it outside for an hour.

0 Likes
Reply
AntonioC_VZW
Verizon Employee

Thanks for the additional information, jghelps!

Have you tried resetting the Network Extender device by powering it off and back on?  Here's a link with information about the LED Status Indicators: http://www.verizonwireless.com/support/knowledge-base-36589/.  Please keep us posted.  Thanks!

AntonioC_VZW

Follow us on Twitter @VZWSupport

0 Likes
Reply
jgphelps
Newbie

This device has been powered off and on dozens of times. I took it home over the weekend and connected it to my home DSL router and it worked fine. All lights turned blue. But it still does not work here at the office. I still have Cisco helping me but I do not know what else to tell them other than the ports we opened as described in the help files.

0 Likes
Reply
loismarks
Newbie

I'm looking for a used SCS-2U3100.  If you have one that you'd like to part ways with, please contact me at [removed] or [removed].

Thanks!

Personal information removed as required by the

Message was edited by: Admin Moderator

0 Likes
Reply