Skip to main content
Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu
cancel
Showing results for 
Search instead for 
Did you mean: 
***Announcement: We’re excited to inform you that we will be merging the Fios and Wireless Communities to a unified Verizon Community with a new look and feel throughout. If you are interested in what specifically has changed, please see the New Revamped Community article under the Featured Topics.***
Jetpack USB drivers
nomomot
Member

I want to connect the Jetpack 7730L to an Asus router using USB.  The router wants to know what USB driver to use.  The router has a drop down menu of about 3 dozen different drivers.  Does anyone know what driver the 7730L uses?

0 Likes
Re: Jetpack USB drivers
7e18n1
Sr. Member

Everything necessary is in the router. Even if it was listed it probably wouldn't work because the Jetpack and router have the same IP address. Change the router's LAN IP address to 192.168.2.1. You may have to enable Dual WAN support too. Asus programming logic will be able to communicate with the Jetpack and you should see the Jetpack's name on the Network Map. If the Jetpack doesn't start working through the router then post the last section of System Log that it starts with:

Aug  1 00:00:11 syslogd started: BusyBox v1.17.4

Aug  1 00:00:11 kernel: klogd started: BusyBox v1.17.4 (2017-04-06 01:11:47 CST)

I don't need the whole log, just the last restart from "syslogd started: BusyBox…" followed by kernel: klogd started: Busybox… to the end of the log. The end of the log is what you see when you click System Log, scroll back through the log looking for the BusyBox entries and then COPY and PASTE from there to the end of the log, to here.

0 Likes
Re: Jetpack USB drivers
AUDRIC86
Member

I've got a similar problem, tried what you posted, to no avail. I have the 791L jetpack and the Asus ac68u router. Mind if I send you my log? It looks like the router has established a connection with the jetpack, though no device can connect to the internet. Also, my Plex clients on the network seem to have stopped connecting to the server. Might be related.

0 Likes
Re: Jetpack USB drivers
7e18n1
Sr. Member

I don't mind at all, go ahead and post it!

0 Likes
Re: Jetpack USB drivers
nomomot
Member

I changed the ASUS router address to 192.168.2.1 and went to the USB application and selected the setup for 3G/4G tethering.  When I try that with my LG smartphone, it will recognize my smartphone, tether correctly, and has internet access.

The ASUS router won't recognize the jetpack attached to it's USB input.  It reports nothing attached to the USB.

Here is what is in the ASUS routers Log:

Dec 31 18:00:12 syslogd started: BusyBox v1.17.4

Dec 31 18:00:12 kernel: klogd started: BusyBox v1.17.4 (2014-11-13 05:22:53 CST)

Dec 31 18:00:12 kernel: Linux version 2.6.2219 (root@asus) (gcc version 3.4.2) #1 Thu Nov 13 05:25:25 CST 2014

Dec 31 18:00:12 kernel:  The CPU feqenuce set to 500 MHz

Dec 31 18:00:12 kernel: CPU revision is: 0001974c

Dec 31 18:00:12 kernel: Determined physical RAM map:

Dec 31 18:00:12 kernel:  memory: 08000000 @ 00000000 (usable)

Dec 31 18:00:12 kernel: Built 1 zonelists.  Total pages: 32512

Dec 31 18:00:12 kernel: Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd

Dec 31 18:00:12 kernel: Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.

Dec 31 18:00:12 kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.

Dec 31 18:00:12 kernel: cause = 40808000, status = 11000000

Dec 31 18:00:12 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)

Dec 31 18:00:12 kernel: calculating r4koff... 001e8480(2000000)

Dec 31 18:00:12 kernel: CPU frequency 500.00 MHz

Dec 31 18:00:12 kernel: Using 250.000 MHz high precision timer.

Dec 31 18:00:12 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Dec 31 18:00:12 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Dec 31 18:00:12 kernel: Mount-cache hash table entries: 512

Dec 31 18:00:12 kernel: RALINK_PCI_PCICFG_ADDR = 0

Dec 31 18:00:12 syslog: module ledtrig-usbdev not found in modules.dep

Dec 31 18:00:12 syslog: module leds-usb not found in modules.dep

Dec 31 18:00:12 kernel: *************** Ralink PCIe RC mode *************

Dec 31 18:00:12 kernel: registering PCI controller with io_map_base unset

Dec 31 18:00:12 kernel: 2->[1][0][0][30]=0

Dec 31 18:00:12 kernel: 5->[1][0][0][30]=fffffffe

Dec 31 18:00:12 kernel: 2->[1][0][0][30]=0

Dec 31 18:00:12 kernel: 5->[1][0][0][30]=0

Dec 31 18:00:12 kernel: BAR0 at slot 0 = 0

Dec 31 18:00:12 kernel: bus=0, slot = 0x0

Dec 31 18:00:12 kernel: P2P(PCI) 0x00 = 08021814

Dec 31 18:00:12 kernel: P2P(PCI) 0x04 = 00100007

Dec 31 18:00:12 kernel: P2P(PCI) 0x08 = 06040001

Dec 31 18:00:12 kernel: P2P(PCI) 0x0c = 00010014

Dec 31 18:00:12 kernel: P2P(PCI) 0x10 = 00000000

Dec 31 18:00:12 kernel: P2P(PCI) 0x14 = 20100000

Dec 31 18:00:12 kernel: P2P(PCI) 0x18 = 00010100

Dec 31 18:00:12 kernel: P2P(PCI) 0x1c = 000000f0

Dec 31 18:00:12 kernel: P2P(PCI) 0x20 = 20002000

Dec 31 18:00:12 kernel: P2P(PCI) 0x24 = 0000fff0

Dec 31 18:00:12 kernel: P2P(PCI) 0x28 = 00000000

Dec 31 18:00:12 kernel: P2P(PCI) 0x2c = 00000000

Dec 31 18:00:12 kernel: P2P(PCI) 0x30 = 00000000

Dec 31 18:00:12 kernel: P2P(PCI) 0x34 = 00000040

Dec 31 18:00:12 kernel: P2P(PCI) 0x38 = 00000000

Dec 31 18:00:12 kernel: P2P(PCI) 0x3c = 00040100

Dec 31 18:00:12 kernel: res[0]->start = 0

Dec 31 18:00:12 kernel: res[0]->end = 1ffffff

Dec 31 18:00:12 kernel: res[1]->start = 20100000

Dec 31 18:00:12 kernel: res[1]->end = 2010ffff

Dec 31 18:00:12 kernel: res[2]->start = 0

Dec 31 18:00:12 kernel: res[2]->end = 0

Dec 31 18:00:12 kernel: res[3]->start = 0

Dec 31 18:00:12 kernel: res[3]->end = 0

Dec 31 18:00:12 kernel: res[4]->start = 0

Dec 31 18:00:12 kernel: res[4]->end = 0

Dec 31 18:00:12 kernel: res[5]->start = 0

Dec 31 18:00:12 kernel: res[5]->end = 0

Dec 31 18:00:12 kernel: bus=1, slot = 0x0

Dec 31 18:00:12 kernel: dev III(PCIe)  0x00 = 30911814

Dec 31 18:00:12 kernel: dev III(PCIe)  0x04 = 00100000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x08 = 02800000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x0c = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x10 = 20000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x14 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x18 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x1c = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x20 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x24 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x28 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x2c = 30911814

Dec 31 18:00:12 kernel: dev III(PCIe)  0x30 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x34 = 00000040

Dec 31 18:00:12 kernel: dev III(PCIe)  0x38 = 00000000

Dec 31 18:00:12 kernel: dev III(PCIe)  0x3c = 000001ff

Dec 31 18:00:12 kernel: res[0]->start = 20000000

Dec 31 18:00:12 kernel: res[0]->end = 2000ffff

Dec 31 18:00:12 kernel: res[1]->start = 0

Dec 31 18:00:12 kernel: res[1]->end = 0

Dec 31 18:00:12 kernel: res[2]->start = 0

Dec 31 18:00:12 kernel: res[2]->end = 0

Dec 31 18:00:12 kernel: res[3]->start = 0

Dec 31 18:00:12 kernel: res[3]->end = 0

Dec 31 18:00:12 kernel: res[4]->start = 0

Dec 31 18:00:12 kernel: res[4]->end = 0

Dec 31 18:00:12 kernel: res[5]->start = 0

Dec 31 18:00:12 kernel: res[5]->end = 0

Dec 31 18:00:12 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

Dec 31 18:00:12 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)

Dec 31 18:00:12 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

Dec 31 18:00:12 kernel: ralink flash device: 0x1000000 at 0x1c000000

Dec 31 18:00:13 kernel:  Amd/Fujitsu Extended Query Table at 0x0040

Dec 31 18:00:13 kernel: number of CFI chips: 1

Dec 31 18:00:13 kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Dec 31 18:00:13 kernel: partion 3: 50000 fb0000

Dec 31 18:00:13 kernel: partion 4: 149200 eb6e00

Dec 31 18:00:13 kernel: Creating 5 MTD partitions on "Ralink SoC physically mapped flash":

Dec 31 18:00:13 kernel: 0x00000000-0x00030000 : "Bootloader"

Dec 31 18:00:13 kernel: 0x00030000-0x00040000 : "nvram"

Dec 31 18:00:13 kernel: 0x00040000-0x00050000 : "Factory"

Dec 31 18:00:13 kernel: 0x00050000-0x01000000 : "linux"

Dec 31 18:00:13 kernel: mtd: partition "linux" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x7b0000

Dec 31 18:00:13 kernel: 0x00149200-0x01000000 : "rootfs"

Dec 31 18:00:13 kernel: mtd: partition "rootfs" extends beyond the end of device "Ralink SoC physically mapped flash" -- size truncated to 0x6b6e00

Dec 31 18:00:13 kernel: mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

Dec 31 18:00:13 kernel: Load Ralink DFS Timer Module

Dec 31 18:00:13 kernel: RT3xxx EHCI/OHCI init.

Dec 31 18:00:13 kernel: pcie_portdrv_probe->Dev[1814:0802] has invalid IRQ. Check vendor BIOS

Dec 31 18:00:13 kernel: assign_interrupt_mode Found MSI capability

Dec 31 18:00:13 kernel: GPIO MODE: 181d

Dec 31 18:00:13 kernel: Ralink gpio driver initialized

Dec 31 18:00:13 kernel: software reset RTL8367M...

Dec 31 18:00:13 kernel: rtk_switch_init() return 0

Dec 31 18:00:13 kernel: rtk_port_macForceLinkExt0_set(): return 0

Dec 31 18:00:13 kernel: rtk_port_macForceLinkExt1_set(): return 0

Dec 31 18:00:13 kernel: power down all ports

Dec 31 18:00:13 kernel: org Ext0 txDelay: 0, rxDelay: 0

Dec 31 18:00:13 kernel: org Ext1 txDelay: 0, rxDelay: 0

Dec 31 18:00:13 kernel: new Ext0 txDelay: 1, rxDelay: 0

Dec 31 18:00:13 kernel: rtk_port_rgmiiDelayExt0_set(): return 0

Dec 31 18:00:13 kernel: new Ext1 txDelay: 1, rxDelay: 0

Dec 31 18:00:13 kernel: rtk_port_rgmiiDelayExt1_set(): return 0

Dec 31 18:00:13 kernel: rtk_led_enable_set(LED_GROUP_0...): return 0

Dec 31 18:00:13 kernel: rtk_led_enable_set(LED_GROUP_1...): return 0

Dec 31 18:00:13 kernel: rtk_led_operation_set(): return 0

Dec 31 18:00:13 kernel: rtk_led_groupConfig_set(LED_GROUP_0...): return 0

Dec 31 18:00:13 kernel: rtk_led_groupConfig_set(LED_GROUP_1...): return 0

Dec 31 18:00:13 kernel: current led blinkRate: 0

Dec 31 18:00:13 kernel: rtk_switch_maxPktLen_get(): return 0

Dec 31 18:00:13 kernel: current rtk_switch_maxPktLen: 3

Dec 31 18:00:13 kernel: rtk_switch_maxPktLen_set(): return 0

Dec 31 18:00:13 kernel: rtk_switch_greenEthernet_get(): return 0

Dec 31 18:00:13 kernel: current rtk_switch_greenEthernet state: 1

Dec 31 18:00:13 kernel: rtk_switch_greenEthernet_set(): return 0

Dec 31 18:00:13 kernel: RTL8367M driver initialized

Dec 31 18:00:13 kernel: rdm_major = 254

Dec 31 18:00:13 kernel: Ralink APSoC Ethernet Driver Initilization. v3.0  256 rx/tx descriptors allocated, mtu = 1500!

Dec 31 18:00:13 kernel: GMAC1_MAC_ADRH -- : 0x000014dd

Dec 31 18:00:13 kernel: GMAC1_MAC_ADRL -- : 0xa9d90ccc

Dec 31 18:00:13 kernel: PROC INIT OK!

Dec 31 18:00:13 kernel: u32 classifier

Dec 31 18:00:13 kernel:     OLD policer on

Dec 31 18:00:13 kernel: Netfilter messages via NETLINK v0.30.

Dec 31 18:00:13 kernel: nf_conntrack version 0.5.0 (1024 buckets, 8192 max)

Dec 31 18:00:13 kernel: ipt_time loading

Dec 31 18:00:13 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team

Dec 31 18:00:13 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team

Dec 31 18:00:13 kernel: VFS: Mounted root (squashfs filesystem) readonly.

Dec 31 18:00:13 kernel: Warning: unable to open an initial console.

Dec 31 18:00:13 kernel: GPIOMODE before: 181d

Dec 31 18:00:13 kernel: GPIOMODE writing: 185d

Dec 31 18:00:13 kernel: power down all ports

Dec 31 18:00:13 kernel: set unknown unicast strom control rate as: 20

Dec 31 18:00:13 kernel: set unknown multicast strom control rate as: 20

Dec 31 18:00:13 kernel: set multicast strom control rate as: 20

Dec 31 18:00:13 kernel: set broadcast strom control rate as: 20

Dec 31 18:00:13 kernel: rt2860v2_ap: module license 'unspecified' taints kernel.

Dec 31 18:00:13 kernel: === pAd = c0054000, size = 851864 ===

Dec 31 18:00:13 kernel: <-- RTMPAllocAdapterBlock, Status=0

Dec 31 18:00:13 kernel: register rt2860

Dec 31 18:00:13 kernel: === pAd = c0151000, size = 725984 ===

Dec 31 18:00:13 kernel: <-- RTMPAllocTxRxRingMemory, Status=0

Dec 31 18:00:13 kernel: <-- RTMPAllocAdapterBlock, Status=0

Dec 31 18:00:13 kernel: pAd->CSRBaseAddress =0xc0140000, csr_addr=0xc0140000!

Dec 31 18:00:13 kernel: Algorithmics/MIPS FPU Emulator v1.5

Dec 31 18:00:13 kernel: SCSI subsystem initialized

Dec 31 18:00:13 kernel: ufsd: driver 8.5 (NTFS4LINUX_U85_022_S[2011-11-29-13:37:54]) LBD=ON with ioctl loaded at c04ba000

Dec 31 18:00:13 kernel: NTFS support included

Dec 31 18:00:13 kernel: Built_for__asus_n56u_2011-11-22

Dec 31 18:00:14 kernel: Raeth v3.0 (Tasklet,SkbRecycle)

Dec 31 18:00:14 kernel: phy_tx_ring = 0x07fc7000, tx_ring = 0xa7fc7000

Dec 31 18:00:14 kernel: phy_rx_ring0 = 0x07295000, rx_ring0 = 0xa7295000

Dec 31 18:00:14 kernel: GMAC1_MAC_ADRH -- : 0x000014dd

Dec 31 18:00:14 kernel: GMAC1_MAC_ADRL -- : 0xa9d90ccc

Dec 31 18:00:14 kernel: GDMA2_MAC_ADRH -- : 0x000014dd

Dec 31 18:00:14 kernel: GDMA2_MAC_ADRL -- : 0xa9d90cc8

Dec 31 18:00:14 kernel: eth3: ===> VirtualIF_open

Dec 31 18:00:15 kernel: CDMA_CSG_CFG = 81000007

Dec 31 18:00:15 kernel: GDMA1_FWD_CFG = C0710000

Dec 31 18:00:15 kernel: GDMA2_FWD_CFG = C0710000

Dec 31 18:00:15 kernel: RX DESC a77ce000  size = 2048

Dec 31 18:00:15 kernel: RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5

Dec 31 18:00:15 kernel: NVM is FLASH mode

Dec 31 18:00:15 kernel: 1. Phy Mode = 9

Dec 31 18:00:15 kernel: 2. Phy Mode = 9

Dec 31 18:00:15 kernel: 3. Phy Mode = 9

Dec 31 18:00:15 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1

Dec 31 18:00:15 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0

Dec 31 18:00:15 kernel: MCS Set = ff ff 00 00 01

Dec 31 18:00:15 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:17 kernel: =====================================================

Dec 31 18:00:17 kernel: Channel 1 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 2 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 3 : Dirty = 0, False CCA = 45, Busy Time = 1173, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 4 : Dirty = 0, False CCA = 20, Busy Time = 971, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 5 : Dirty = 0, False CCA = 35, Busy Time = 1099, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 6 : Dirty = 0, False CCA = 36, Busy Time = 1125, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 7 : Dirty = 0, False CCA = 32, Busy Time = 1111, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 8 : Dirty = 0, False CCA = 46, Busy Time = 1179, Skip Channel = FALSE

Dec 31 18:00:17 kernel: Channel 9 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:18 kernel: Channel 10 : Dirty = 0, False CCA = 3, Busy Time = 76, Skip Channel = FALSE

Dec 31 18:00:18 kernel: Channel 11 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:18 kernel: =====================================================

Dec 31 18:00:18 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 1

Dec 31 18:00:18 kernel: Min Dirty = 0

Dec 31 18:00:18 kernel: ExChannel = 5 , 0

Dec 31 18:00:18 kernel: BW        = 40

Dec 31 18:00:18 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:18 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:18 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:18 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:19 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:19 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:19 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:20 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:20 kernel: Main bssid = 14:dd:a9:d9:0c:c8

Dec 31 18:00:20 kernel: <==== rt28xx_init, Status=0

Dec 31 18:00:20 kernel: 0x1300 = 00064380

Dec 31 18:00:20 kernel: RX DESC a6c3c000  size = 2048

Dec 31 18:00:20 kernel: <-- RTMPAllocTxRxRingMemory, Status=0

Dec 31 18:00:20 kernel: 1. Phy Mode = 8

Dec 31 18:00:20 kernel: 2. Phy Mode = 8

Dec 31 18:00:20 kernel: 3. Phy Mode = 8

Dec 31 18:00:20 kernel: ^[[mAntCfgInit: primary/secondary ant 0/1

Dec 31 18:00:20 kernel: ^[[mRTMPSetPhyMode: channel is out of range, use first channel=0

Dec 31 18:00:20 kernel: MCS Set = ff ff ff 00 01

Dec 31 18:00:20 kernel: SYNC - BBP R4 to 20MHz.l

Dec 31 18:00:22 kernel:  ch149 bssid=28:80:a2:00:66:d0

Dec 31 18:00:22 kernel: =====================================================

Dec 31 18:00:22 kernel: Channel 36 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 40 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 44 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 48 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 149 : Dirty = 70, False CCA = 4, Busy Time = 340, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 153 : Dirty = 32, False CCA = 0, Busy Time = 0, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 157 : Dirty = 0, False CCA = 0, Busy Time = 244, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 161 : Dirty = 0, False CCA = 7, Busy Time = 127, Skip Channel = FALSE

Dec 31 18:00:22 kernel: Channel 165 : Dirty = 0, False CCA = 1, Busy Time = 5, Skip Channel = TRUE

Dec 31 18:00:22 kernel: =====================================================

Dec 31 18:00:22 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 36

Dec 31 18:00:22 kernel: Min Dirty = 0

Dec 31 18:00:22 kernel: ExChannel = 0 , 0

Dec 31 18:00:22 kernel: BW        = 40

Dec 31 18:00:22 kernel: Main bssid = 14:dd:a9:d9:0c:cc

Dec 31 18:00:22 kernel: <==== rt28xx_init, Status=0

Dec 31 18:00:22 kernel: 0x1300 = 00064380

Dec 31 18:00:23 stop_nat_rules: apply the redirect_rules!

Dec 31 18:00:23 WAN Connection: Ethernet link down.

Dec 31 18:00:23 dnsmasq[303]: warning: interface ppp1* does not currently exist

Dec 31 18:00:23 RT-N56U: start httpd

Dec 31 18:00:23 kernel: set watchdog pid as: 315

Dec 31 18:00:23 kernel: set watchdog pid as: 315

Dec 31 18:00:23 miniupnpd[334]: HTTP listening on port 55461

Dec 31 18:00:23 miniupnpd[334]: Listening for NAT-PMP traffic on port 5351

Dec 31 18:00:24 kernel: GDMA2_MAC_ADRH -- : 0x000014dd

Dec 31 18:00:24 kernel: GDMA2_MAC_ADRL -- : 0xa9d90cc8

Dec 31 18:00:24 kernel: eth3: ===> VirtualIF_open

0 Likes
Re: Jetpack USB drivers
nomomot
Member

see post below

0 Likes
Re: Jetpack USB drivers
7e18n1
Sr. Member

What Asus router is this? The log file shows multiple router model numbers and it is not detecting any USB device. .

0 Likes
Re: Jetpack USB drivers
nomomot
Member

RT-N56U

It will tether right up to my LG smartphone. Simple as can be. I can't get it to even see the jetpack.

0 Likes