An Accepted Solution is available for this post.
jetpack mifi 6620 repeatedly resets
Chipmunk2485
Newbie
‎10-30-2017 02:00 AM

This just started in the 24 hours. I traveled from Portland, Oregon to Carson City, Nevada a couple days ago, and this behavior just appeared suddenly. Every few minutes, the unit restarts. It seems it's actually doing a double reset. Here are the logs for the past couple resets. I have not made any profile changes to the device before this behavior started.

Any ideas? Thanks.

Oct 30 08:47:08 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtRoamPreference: Roam preference = 0xff
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtRoamStateHandler: not roaming
Oct 30 08:47:08 (none) ccm: [L_WAN] Network PLMN mode: 1
Oct 30 08:47:08 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtUimStateHandler: SIM_READY
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: DISABLED
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin retries = 3
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin unblocks = 10
Oct 30 08:47:08 (none) ccm: [L_WAN] SIM status: SIM_READY
Oct 30 08:47:08 (none) ccm: [L_WAN] Pin Status = WAN_PIN_STATUS_DISABLED, retries left = 3, unlock left = 10
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtConnStateHandler: IDLE
Oct 30 08:47:08 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x03
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPlmnMode: plmn mode: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] Network PLMN mode: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtCurrentPlmnNameHandler: process_home_uicc_plmn
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtRegStatusHandler: Registered
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtCurMccMncHandler: mccmnc=311480
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtCurMccMncHandler: oper = Verizon
Oct 30 08:47:08 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtRoamPreference: Roam preference = 0xff
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtRoamStateHandler: not roaming
Oct 30 08:47:08 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtUimStateHandler: SIM_READY
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: DISABLED
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin retries = 3
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin unblocks = 10
Oct 30 08:47:08 (none) ccm: [L_WAN] SIM status: SIM_READY
Oct 30 08:47:08 (none) ccm: [L_WAN] Pin Status = WAN_PIN_STATUS_DISABLED, retries left = 3, unlock left = 10
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtConnStateHandler: IDLE
Oct 30 08:47:08 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x03
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtPlmnMode: plmn mode: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] Network PLMN mode: 0
Oct 30 08:47:08 (none) ccm: [L_WAN] QmiEvtCurrentPlmnNameHandler: process_home_uicc_plmn
Oct 30 08:47:08 (none) ccm: [L_WAN] Network PLMN mode: 1
Oct 30 08:47:08 (none) ccm: [L_WAN] process_event: CCM_EVENT_SIM_STATE, SIM status = 3
Oct 30 08:47:08 (none) ccm: [L_WAN] CCM_EVENT_SIM_STATE Clearing VZW SIM BUSY TIMER
Oct 30 08:47:08 (none) ccm: [L_WAN] CCM_EVENT_PIN_STATUS Clearing VZW SIM BUSY TIMER
Oct 30 08:47:08 (none) ccm: [L_WAN] process_event: CCM_EVENT_SIM_STATE, SIM status = 3
Oct 30 08:47:08 (none) ccm: [L_WAN] CCM_EVENT_SIM_STATE Clearing VZW SIM BUSY TIMER
Oct 30 08:47:08 (none) ccm: [L_WAN] CCM_EVENT_PIN_STATUS Clearing VZW SIM BUSY TIMER
Oct 30 08:47:08 (none) ccm: [L_WAN] Wifi Mac address: 00:15:ff:a1:16:b1
Oct 30 08:47:21 (none) ccm: [L_WAN] Current backhaul: modem
Oct 30 08:47:21 (none) ccm: [L_WAN] Device state: WAN_STATE_IDLE
Oct 30 08:47:21 (none) ccm: [L_WAN] WWAN Tech = LTE
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtRegStatusHandler: Registered
Oct 30 08:47:21 (none) ccm: [L_WAN] Network PLMN mode: 1
Oct 30 08:47:21 (none) ccm: [L_WAN] WWAN Tech = LTE
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtCurMccMncHandler: mccmnc=311480
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtCurMccMncHandler: oper = Verizon
Oct 30 08:47:21 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtRoamPreference: Roam preference = 0xff
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtRoamStateHandler: not roaming
Oct 30 08:47:21 (none) ccm: [L_WAN] Roam status: 0
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtUimStateHandler: SIM_READY
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: DISABLED
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin retries = 3
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtPin1StateHandler: pin unblocks = 10
Oct 30 08:47:21 (none) ccm: [L_WAN] SIM status: SIM_READY
Oct 30 08:47:21 (none) ccm: [L_WAN] Pin Status = WAN_PIN_STATUS_DISABLED, retries left = 3, unlock left = 10
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtConnStateHandler: IDLE
Oct 30 08:47:21 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x03
Oct 30 08:47:21 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x03
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtPlmnMode: plmn mode: 0
Oct 30 08:47:21 (none) ccm: [L_WAN] Network PLMN mode: 0
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtCurrentPlmnNameHandler: process_home_uicc_plmn
Oct 30 08:47:21 (none) ccm: [L_WAN] Performing auto-connect base on service
Oct 30 08:47:21 (none) ccm: [L_WAN] modem_cm_connect : WAN CM Starting data call
Oct 30 08:47:21 (none) ccm: [L_WAN] validate_roaming_for_call: current roaming pref = 0xff
Oct 30 08:47:21 (none) ccm: [L_WAN] validate_roaming_for_call: current roam status: ccm=0x00
Oct 30 08:47:21 (none) ccm: [L_WAN] validate_roaming_for_call: Roaming check is okay
Oct 30 08:47:21 (none) ccm: [L_WAN] Modem_StartCall: starting prof=3
Oct 30 08:47:21 (none) ccm: [L_WAN] Data call started
Oct 30 08:47:21 (none) ccm: [L_WAN] start_network_interface_callback: call_handle = 0x0548f4b0
Oct 30 08:47:21 (none) ccm: [L_WAN] start_network_interface_callback: end_reason = 0x00000000
Oct 30 08:47:21 (none) ccm: [L_WAN] start_network_interface_callback: verbose_end_reason = 0x00000000
Oct 30 08:47:21 (none) ccm: [L_WAN] QmiEvtConnStateHandler: CONNECTED
Oct 30 08:47:21 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x05
Oct 30 08:47:21 (none) ccm: [L_WAN] ModemEventCallback ipv4 call up
Oct 30 08:47:23 (none) ccm: [L_WAN] ModemEventCallback: MDM_EVT_CONN_STATE: 0x05
Oct 30 08:47:23 (none) ccm: [L_WAN] QmiEvtDevStateHandler: WAN_STATE_CONNECTED
Oct 30 08:47:23 (none) ccm: [L_WAN] QmiEvtConnDormHandler: NOT DORMANT
Oct 30 08:47:23 (none) ccm: [L_WAN] Dormancy: 0
Oct 30 08:47:23 (none) ccm: [L_WAN] Device state: WAN_STATE_CONNECTED
Oct 30 08:47:23 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:47:24 (none) ccm: [L_WAN] process_event: CCM_EVENT_SIM_STATE, SIM status = 3
Oct 30 08:47:24 (none) ccm: [L_WAN] CCM_EVENT_SIM_STATE Clearing VZW SIM BUSY TIMER
Oct 30 08:47:24 (none) ccm: [L_WAN] CCM_EVENT_PIN_STATUS Clearing VZW SIM BUSY TIMER
Oct 30 08:47:24 (none) ccm: [L_WAN] Modem_StartCallAdmin: making sure wdsadmin is open...
Oct 30 08:47:24 (none) ccm: [L_WAN] Starting Admin/apps Call: prof=4
Oct 30 08:47:24 (none) ccm: [L_WAN] start_network_interface_callback_admin: admin call_handle = 0x0549c4c0
Oct 30 08:47:24 (none) ccm: [L_WAN] start_network_interface_callback_admin: admin end_reason = 0x00000000
Oct 30 08:47:24 (none) ccm: [L_WAN] start_network_interface_callback_admin: admin verbose_end_reason = 0x00000000
Oct 30 08:47:24 (none) ccm: [L_WAN] QmiEvtCallResponseAdmin: admin call connected
Oct 30 08:47:24 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin: CONNECTED
Oct 30 08:47:24 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin:9919 starting ifc: rmnet2
Oct 30 08:47:26 (none) ccm: [L_WAN] CCM_EVENT_PIN_STATUS Clearing VZW SIM BUSY TIMER
Oct 30 08:47:26 (none) ccm: [L_WAN] CCM_EVENT_PIN_STATUS Clearing VZW SIM BUSY TIMER
Oct 30 08:47:26 (none) ccm: [L_WAN] Stopping admin data call
Oct 30 08:47:26 (none) ccm: [L_WAN] nwqmi_wdsadmin_stop_call: admin call_handle = 0x0549c4c0
Oct 30 08:47:26 (none) ccm: [L_WAN] nwqmi_wdsadmin_stop_call: err = = 0x00000000
Oct 30 08:47:26 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin: IDLE
Oct 30 08:47:26 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin: stopping ifc: rmnet2
Oct 30 08:47:26 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin: IDLE
Oct 30 08:47:26 (none) ccm: [L_WAN] QmiEvtConnStateHandlerAdmin: stopping ifc: rmnet2
Oct 30 08:47:37 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:47:37 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:47:53 (none) ccm: [L_WAN] Modem profile changed
Oct 30 08:51:23 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:51:23 (none) ccm: [L_WAN] Wifi diassociated
Oct 30 08:51:23 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:53:45 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:53:45 (none) ccm: [L_WAN] Wifi diassociated
Oct 30 08:53:45 (none) ccm: [L_WAN] Wifi associated
Oct 30 08:57:13 (none) ccm: [L_WAN] Modem profile changed
Labels (1)
Labels
0 Likes
Reply
2 Replies
An Accepted Solution is available for this post.
vzw_customer_support
Customer Service Rep
‎11-01-2017 02:05 AM

We want to en be sure your concerns are addresssed. May we ask if you have completely powered the device off and let it rest? KleoL_VZW

Follow us on Twitter @VZWSupport

If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!

0 Likes
Reply
An Accepted Solution is available for this post.
John_Getzke
Champion - Level 1
‎11-01-2017 05:46 AM

I haven't looked at the startup logs for other 6620's but this appears normal at a glance.  The Jetpack goes through a series of checks on the SIM card and connectivity states before it becomes available to accept incoming WiFi connections.  There are a few WiFi assoc/dissocitations near the end suggesting something was going in and out of coverage but no errors.  Perhaps that is normal for this scenario.

I would think the best place to start would be the usual Jetpack reset process.  Its likely you have already tried manually rebooting the Jetpack so move onto the SIM card reset next.  Power down the Jetpack, remove the SIM, let it sit for 30 seconds then reassemble and test.

If the problem persists then try pressing the restore defaults button under the back cover for around 15-30 seconds with a paper clip.  This will reset the jetpack and clear up any temporary configuration issues that could be occurring.

Contact VZW support for warranty assistance from there.

0 Likes
Reply