WireMaster wrote:
I just upgraded to the Razr Maxx and can't get it to see my bluetooth device at all when scanning. Any obvious hints or tips I am overlooking?
Welcome to the Forum: first off what kind of Blue headset are Using ? If you have had previous Motos like the Droid X it's Basically the same as the Pairing Goes. But Try this Go to Settings > Scroll to the Top to Wireless & Network Settings > Tap it look down just a bit to find Blue tooth & Blue tooth Settings Make sure Bluetooth is check > then go in to your settings.. An just like you had to to do with your Previous U was using Turn Bluetooth On an put it in Pairing Mode that way the Maxx can find it. While it is in pairing Mode Tap scan for Devices: you should then see it Pop Up in the Devices Box An with the Maxx Normally you Don't have to put the 0000 code in just let it Do it's thing an you should see Your Head set in the Box with {PAIRED BUT NOT CONNECTED} Tap on your Device an give a Few seconds an it should say it's Connected. Do that all that i suggested an you should be Hooked Up.. Let me know on here in this Post if that Worked for Ya.! b33 
