An Accepted Solution is available for this post. Jump to solution.
What do these lights mean on my network extender?
sjacobs71
Newbie
‎11-01-2015 08:21 AM

Having problems with extender with the above solid lights. PWR: blue; SYS: red; GPS: magenta; WAN: red  Any suggestions?

Labels (1)
0 Likes
1 Solution

Correct answers
An Accepted Solution is available for this post. Jump to solution.
Re: PWR: blue; SYS: red; GPS: magenta; WAN: red
7e18n1
Specialist - Level 3
‎11-01-2015 04:45 PM

The WAN light is supposed to be blue. Make sure the Ethernet cable is plugged in or try replacing the Ethernet cable between the WAN port and a LAN port on your router.

View solution in original post

0 Likes
2 Replies
An Accepted Solution is available for this post. Jump to solution.
Re: PWR: blue; SYS: red; GPS: magenta; WAN: red
7e18n1
Specialist - Level 3
‎11-01-2015 04:45 PM

The WAN light is supposed to be blue. Make sure the Ethernet cable is plugged in or try replacing the Ethernet cable between the WAN port and a LAN port on your router.

0 Likes
An Accepted Solution is available for this post. Jump to solution.
Re: PWR: blue; SYS: red; GPS: magenta; WAN: red
John_Getzke
Champion - Level 1
‎11-02-2015 06:06 AM

There is more information on the light codes under the user guide.  If you confirm which Verizon device you are referring to here we can help you look up and confirm what the device is trying to tell you.

Otherwise the usual resets are normally necessary to clear temporary problems like this.  Reboot the device, check cables and internet connection, etc.

0 Likes