- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
My session times out before it's done. I log back on and it says "it;s still working on the last request". Woke today, tried again, same thing. I just switched phones, they are the same model, a Krave.
Solved! Go to Correct Answer
Correct answers
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have provided some information below that may help.
Step 1 – Complete a soft reset
-Power the device off
-Pull the battery on the device
-Place the battery back in
-Power the device back on
Step 2 – Program the device
-Dial *228 and press send
-Press option 1 once the automated system requests
-Wait 45 seconds for the programming to complete.
Step 3 – Ensure the correct information is showing on the My Account website. Instructions below:
-Visit www.verizonwireless.com and login using your username and password. The contacts can be found under the Messaging tab and contacts.
Step 4 – Try removing the Backup Assist program on the device and complete another soft reset.
Canceling and removing Backup Assistant
http://support.vzw.com/clc/devices/knowledge_base.html?id=24587
Step 5 – Download the backup assistant program once again and try to re-sync.
Download and Configure Backup Assistant
http://support.vzw.com/clc/devices/knowledge_base.html?id=21044
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have provided some information below that may help.
Step 1 – Complete a soft reset
-Power the device off
-Pull the battery on the device
-Place the battery back in
-Power the device back on
Step 2 – Program the device
-Dial *228 and press send
-Press option 1 once the automated system requests
-Wait 45 seconds for the programming to complete.
Step 3 – Ensure the correct information is showing on the My Account website. Instructions below:
-Visit www.verizonwireless.com and login using your username and password. The contacts can be found under the Messaging tab and contacts.
Step 4 – Try removing the Backup Assist program on the device and complete another soft reset.
Canceling and removing Backup Assistant
http://support.vzw.com/clc/devices/knowledge_base.html?id=24587
Step 5 – Download the backup assistant program once again and try to re-sync.
Download and Configure Backup Assistant
http://support.vzw.com/clc/devices/knowledge_base.html?id=21044
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I'm having this same problem. I was going to switch back to my own phone. I had switched the number back but then I remembered I didnt backup my numbers from the previous phone. So I switched the number back to the original phone which still had my contacts saved. I then backed up those contacts, but everytime I press "Sync With Phone" in the Backup Assistant page, it always responds with the message "One Moment Please...We are still processing your sync request"
Usually syncing doesn't take this long. I did a soft reset of the phone and the info the backupassistant page is correct.
What's going on?
Thanks
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Similar problem here.
After importing my contacts (with good help from SuzyQ on this forum) into Backup Assistant, I click Sync to Phone from the BA web page, hoping everything would sync with the phone. The only thing I see is a red progress bar saying 'Syncing' that stays there forever. The phone itself doesn't receive the contacts.