When i do a tracert my ping is really high in the first column only on each hop and then it drops to a respectable level. Does anyone know why it is like this on my 4G LTE device? On my dsl when i do the same ping test its pretty even across on each hop. This is what im seeing when i do a ping test on my 4G LTE device.
Tracing route to ds-any-fp3-real.wa1.b.yahoo.com [18.104.22.168]
over a maximum of 30 hops:
1 9 ms 3 ms 3 ms
2 1101 ms 34 ms 38 ms 193.sub-66-174-20.myvzw.com [22.214.171.124]
3 169 ms 55 ms 52 ms 49.sub-69-83-13.myvzw.com [126.96.36.199]
4 52 ms 56 ms 54 ms 194.sub-69-83-13.myvzw.com [188.8.131.52]
5 179 ms 58 ms 57 ms 101.sub-66-174-17.myvzw.com [184.108.40.206]
6 168 ms 57 ms 60 ms TenGigE0-0-1-0.GW14.BOS4.ALTER.NET [220.127.116.11
7 181 ms 58 ms 57 ms 0.ge-0-3-0.XL3.BOS4.ALTER.NET [18.104.22.168]
8 170 ms 59 ms 58 ms 0.ae3.BR1.NYC1.ALTER.NET [22.214.171.124]
9 177 ms 67 ms 59 ms ae11.edge2.NewYork.Level3.net [126.96.36.199]
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 192 ms 49 ms 60 ms ae-4-90.edge4.NewYork1.Level3.net [188.8.131.52]
14 185 ms 51 ms 60 ms YAHOO-INC.edge4.NewYork1.Level3.net [184.108.40.206
15 380 ms 73 ms 129 ms ae-5.pat2.bfz.yahoo.com [220.127.116.11]
16 339 ms 69 ms 146 ms ae-4.msr2.bf1.yahoo.com [18.104.22.168]
17 215 ms 152 ms 80 ms xe-5-0-0.clr2-a-gdc.bf1.yahoo.com [22.214.171.124
18 289 ms 217 ms 217 ms et-17-1.fab6-1-gdc.bf1.yahoo.com [126.96.36.199]
19 187 ms 87 ms 79 ms po-14.bas2-7-prd.bf1.yahoo.com [188.8.131.52]
20 474 ms 314 ms 294 ms ir2.fp.vip.bf1.yahoo.com [184.108.40.206]
see you never got an answer from vzw
take it you still have the high ping or no ping in my cases
your doing better then i
seems the lte is getting bad with this problem over time as my connection times out causing half loaded web pages and lots of buffering in video playback
i have had 3 tickets in the past 3 month to try and get this fixed but they say cant find anything wrong
and noone else is having the problem here are a few things that seems to have helped me out
1 increase your TTL time till live
this tells your computer to wait a bit longer before giving up and requesting that a packet of info be resent
2 in your computers network settings and reg you can change packet size to a smaller number and add a stop bit to the packet with a time stamp on each packet back in the old days this was what v 90 modems did to get v92 speeds and did help with noisy copper wire dial up and seems to help here too
is a tool that will help you change your computer setting and reg
use drtcp and the results from this page
xp win 7 win 8 this will help. vista did it right and dynamically change these settings on the fly and all of step 2 is unnecessary
remember your original settings write them down so you can go back to them should you have problems
also make a restore point and backup your reg before tinkering with windows os
send a private message to me if you need more help or get a computer savvy friend to help you out if you need
3 if your signal noise is under 4G -100bd the lower the better, there is a way to set your android to lte only mode.
more likely to lose data and voice in weak signal areas but great if tethering or hotspotting at home
dail *#*#4636#*#* this is a back door to your android software and is open source code by android os not vzw
and will not unlock your phone voiding warranties. be warned though if you set things wrong in here
you can make more problems be very sure what you change and do one thing at a time so you remember and can dial in again and change it back should you disable something you need. fyi each time you dial in the number it resets to vzw default setting and may look like it did not save setting but it doz. till you dial in again.
ps im not a vzw rep in any way other then a fellow customer not getting answers.