An Accepted Solution is available for this post.
Wireless network traffic being blocked
Serodon
Newbie
‎10-11-2008 12:05 PM

I have the Verizon MI424WR router and two computers networked wirelessly.  They both can connect to the internet fine but the router itself is blocking all traffic between the two.  When I hardwire my laptop into the router it allows it to communicate with the other computer fine.  Also, I checked the security log and it gives me this event with just about every type of attempt to ping or connect.

Oct 11 14:53:34 2008 Outbound Traffic Blocked - NAT out failed ICMP type 0 code 0 192.168.1.2->192.168.1.3 on ath0 [repeated 2 times, last time on Oct 11 14:53:39 2008]

I tried adding a few rules into the advanced filtering between two computers but they have done nothing.


Any help would be greatly appreciated.

0 Likes
Reply
2 Replies
An Accepted Solution is available for this post.
cjacobs001
Contributor - Level 3
‎10-12-2008 05:44 PM
networking  networking  networking    If you are using XP sp2 or newer might you need to create network shares or something?
0 Likes
Reply
An Accepted Solution is available for this post.
Serodon
Newbie
In response to cjacobs001
‎10-15-2008 09:38 AM

It has nothing to do with network shares. The firewall or nat is blocking all traffic transmitted from one wireless device to the other.

Message Edited by Serodon on 10-15-2008 09:42 AM
0 Likes
Reply