LAN Coax keeps failing on Mi424WR

[apk3]

I'm on my 3rd, soon to be 4th Mi424WR router, the last 3 from the LAN functionality/connection failing - the first just died of old age (6 years on the network).  Is this a known issue with these new FIOS wireless routers?  is there a fix other than waiting 3-4 days for a new router to arrive from VZ after spending a day on the phone with their tech support trouble shooting the router only to determine that the LAN coax connection/terminal on the router is bad.

[Anti-Phish1]

It's very unusual for the coax LAN interface to go bad.

It's much more common for a splitter to fail or for a coax cable connection to oxidize and cause problems.

If you've experienced the same problem on 3 different routers, it not the routers that are bad.

I'd start by disconnecting each coax connection and then reconnecting it.

This will usually remove any oxidation from the connection.

I would then check your MOCA LAN stats.

http://www.dslreports.com/faq/16569

Please post your results from checking your MOCA LAN stats (the second part of the FAQ).

If you have poor MOCA signal levels, the problem is bad coax or a bad splitter.

[apk3]

IP Address	N/A	N/A
Router	N/A	238.78
ONT	236.90	N/A

[apk3]

those were the WAN stats.  the LAN coax is coming up blank since its disconnected due to the error.