Choose your cart
Choose your cart
$540 via promo credit when you add a new smartphone line with your own 4G/5G smartphone on postpaid Unlimited Plus plan between 5/18/23 - 5/31/23 & port-in req'd. Promo credit applied over 36 months; promo credits end if eligibility requirements are no longer met.
Can anyone advise if there is a non Verizon router available that will work with a coax cable coming directly from the ONT. I have only internet and phone service from Verizon. My ONT was replaced with a new ONT about a year ago after being told the old ONT would not be serviced anymore. I have tried the G3100 router but have experienced many of the same problems mentioned in other posts.
Solved! Go to Correct Answer
#1 You only need to use their NAT router if:
a) You have Fios TV One (or if I am/was close but not quite: Fios One TV).
b) You need support from them. Support will end at the ONT if you use your own NAT router.
#2 Since you do not have Fios TV, you can change the cable from the ONT to ethernet.
As how to do that I am not sure since I do not and never had Fios but I know part of the answer.
a) You can wire it your self or hire some one else (ex electrician) to put the wire in place.
b) You must contact Verizon for them to switch it from Moca to ethernet.
c) Once you get their NAT router working, then you can switch it your NAT router.
#3 While I am sure that you could use ethernet instead of Moca, but if desired you could put their NAT router into bridge mode. Then your RJ-45 WAN port NAT router goes behind theirs. But please keep in mind that that Moca will not work above a certain speed (ex: 500 MB. Note sure if that is the correct number).
#1 You only need to use their NAT router if:
a) You have Fios TV One (or if I am/was close but not quite: Fios One TV).
b) You need support from them. Support will end at the ONT if you use your own NAT router.
#2 Since you do not have Fios TV, you can change the cable from the ONT to ethernet.
As how to do that I am not sure since I do not and never had Fios but I know part of the answer.
a) You can wire it your self or hire some one else (ex electrician) to put the wire in place.
b) You must contact Verizon for them to switch it from Moca to ethernet.
c) Once you get their NAT router working, then you can switch it your NAT router.
#3 While I am sure that you could use ethernet instead of Moca, but if desired you could put their NAT router into bridge mode. Then your RJ-45 WAN port NAT router goes behind theirs. But please keep in mind that that Moca will not work above a certain speed (ex: 500 MB. Note sure if that is the correct number).