Trouble Opening Port on Actiontec Router
jms349
Newbie

Hi, a gaming program that I use wants to use ports 6112, 9103, 30350, and 30351. I disabled both my windows 7 firewall and avast! internet security firewall. I went to my routers settings and then to my network-clicked port forwarding under my computer 192.168.1.2 and set a rule to forward each of those ports to my computer as seen below, but when i go to canyouseeme.org and enter port 6112 into the port listener it says:connection refused. I even set my ip address to be the dmz and it still didn't work.

Destination Ports 6112
TCP Any -> 6112
UDP Any -> 6112
All Broadband DevicesActive  

Jimmy-PC
192.168.1.2

Destination Ports 9103
TCP Any -> 9103
UDP Any -> 9103
All Broadband DevicesActive  

Jimmy-PC
192.168.1.2

Destination Ports 30350
TCP Any -> 30350
UDP Any -> 30350
All Broadband DevicesActive  

Jimmy-PC
192.168.1.2

Destination Ports 30351
TCP Any -> 30351
UDP Any -> 30351
All Broadband DevicesActive

0 Likes
Re: Trouble Opening Port on Actiontec Router
Hubrisnxs
Legend

The rules look good. 

Canyouseeme.org only says open if you have a device listening. 

So it's not enough to do the ports and then immediately check that website.

you have to do the port forwarding, launch the program and then do the website. 

Try these, if it's still giving you problems

  

Simple Port Tester

Common Problems & Fixes For Port Forwarding | PcWinTech.com™

 
 
 
0 Likes