Receive up to $504 promo credit ($180 w/Welcome Unlimited, $360 w/ 5G Start, or $504 w/5G Do More, 5G Play More, 5G Get More or One Unlimited for iPhone plan (Welcome Unlimited and One Unlimited for iPhone plans can't be mixed w/other Unlimited plans; all lines on the account req'd on respective plans)) when you add a new smartphone line with your own 4G/5G smartphone on an eligible postpaid plan between 2/10/23 and 3/31/23. Promo credit applied over 36 months; promo credits end if eligibility requirements are no longer met.
I tried calling Verizon yesterday, they said they didn't support this issue. I emailed Actiontec for support, they said it might be a bug and I should talk to Verizon.
Anyway, I'd like to point out that everything works fine until I tamper with this setting, so it's not a critical problem.
My problem is this:
When I log into my router, go into wireless settings > advanced security settings > wireless mac authentication, I click on "enable access list", then "accept all devices listed below", I enter the MAC address for each of the devices I wish to connect to the internet. (If it helps, these are the devices I'm trying to connect: One Mac with OS X 10.5, one PC with Windows 7 Home Premium, and one iPhone.) But when I submit the change, only the first device remains on my list (my Mac), and that's the only device that will connect to the internet. The MAC addresses for the other two devices disappear from my list.
I've tried rebooting the router and everything, but I always have the same problem.
So, does anyone know if this is a bug in the firmware for the router?
This is the response I got from Actiontec: "This could be a bug so please contact Verizon with your findings so they can look into it. Verizon owns the rights to the router, we simply manufacture it to the specifications they require. If the bug is identified they will request new firmware from Actiontec and in due course a new firmware will be released."
There are two main things you should know about MAC Filtering.
#1 MAC Address(es) are always sent in the clear regardless of the type of encryption (WEP/WPA).
#2 MAC Address(es) can be spoofed / cloned.
I would not recommend using MAC Address Filtering. Just use WPA, if you can. If you can not use WPA, use WEP.
Oh okay, thanks. I knew about #2, but not about #1.
I'm currently using WPA2, and I've turned off SSID broadcasting as well. That's probably enough security.
Thanks for the advice!
FiOS Actiontec Wireless MAC Filtering Broken, Actiontec Forgetting MAC Addresses, MAC filtering not working.
I'm having the same problem as the original poster. My router used to remember all my MAC addresses and now it only remembers a short list. It will show an address that I have just added in the list box but will forget it later on. Which makes it a pain to do things like print a document to my wifi-enabled printer, grab the wifi connection on my phone or try to connect when I bring my work laptop home. Luckily my main laptop is on the short list of remembered addresses.
I have WPA2 enabled with a very strong password. I have locked down nearly every other aspect of the router. I've always used MAC filtering as just another line of defense. This USED TO work. Now nothing will fix it.
I've had the router for 2+ years, have never manually updated the firmware, yet the firmware is up to date. I'm guessing there have been firmware updates pushed down by Verizon that broke this functionality at some point.
It looks like my only option now is to disable the filtering and try it in the future when I notice the firmware has been upgrades.
Is NOT a bug, the list CANNOT be done over wireless, you have to be plugged directly to the router in order to be able to do the list.
OK, so not a bug, but definitely a functionality limitation. Will Verizon/Actiontec fix this so that mac address security can be part of the security setup for wirelessly configured routers?
It has been working for me but found that it's limited to only 10 MAC addresses entered into the access list. I had to switch to WEP. Will see if I can use WPA.
Hi, You have to be making the changes to the MAC Filtering on a WIRED connection. I wish all the technical material had made this clear. Anyways, figured it out after a day's tinkering and thanks to one of the posters on this chain. Good luck to everyone who has had this issue. Just use a WIRED connection to make the MAC Filtering changes and you will be fine.
IT IS A BUG!!! Just how are you supposed to have a wired connection to your totally wireless devices such as iPads, Androids, iPhones, etc? I just love the geniuses here who either don't know how to setup MAC filtering or how it is used make comments about something they nothing about.
There is a reason why you don't want to manage APs/routers over a Wireless connection, and that might be the exact reason why the list is not edible for users who are administering the router on an all-wireless network (ouch). Since Wireless MAC Filtering requires restarting the daemon responsible for managing the Wireless radio, when you press the Save button you are running the risk of not only a potentially shoddy wireless connection to begin with, you are also risking hosing your configuration file if during the application of settings (which sometimes can brick the router), the wireless link goes down. Honestly, if a trip to the router to make a configuration change is too much to ask, you should probably consider some other avenues to keeping intruders out of the network.
There are some routers running software that wait a few seconds after data is sent to them before applying the new settings for those just-in-case moments, which the FiOS routers may do. I know my MI424WR with DD-WRT takes about 6 seconds from pushing "Apply" before it starts running the task I assigned it, even if the UI shows it was completed instantly, and that is intentional by design.
Now if this problem is truly a bug or if it is by design, I couldn't tell you since I do not have FiOS here or run the firmware on my ActionTec MI424WR.