Receive up to $504 promo credit ($180 w/Welcome Unlimited, $360 w/ 5G Start, or $504 w/5G Do More, 5G Play More, 5G Get More or One Unlimited for iPhone plan (Welcome Unlimited and One Unlimited for iPhone plans can't be mixed w/other Unlimited plans; all lines on the account req'd on respective plans)) when you add a new smartphone line with your own 4G/5G smartphone on an eligible postpaid plan between 2/10/23 and 4/5/23. Promo credit applied over 36 months; promo credits end if eligibility requirements are no longer met.
$699.99 (128 GB only) device payment purchase or full retail purchase w/ new smartphone line on One Unlimited for iPhone (all lines on account req'd on plan), 5G Start, 5G Do More, 5G Play More or 5G Get More plan req'd. Less $699.99 promo credit applied over 36 mos.; promo credit ends if eligibility req’s are no longer met; 0% APR.
1) they told me it wasn't possible.
2) One of the people I was forwarded to even tried to tell me coax was faster then Ethernet.
3) They told me the ont I had couldn't do Ethernet and I would have to get a new one installed and I would be billed.
4) They also told me I wouldn't be able to get video to my stb's if I used Ethernet.
1) Absolutely possible.
2) Technically true, but irrelevant. MOCA 1.0 can do 135 Mbps vs 100 Mbps for cat5 to the Actiontec. Regardless of what tier you have, you will constrained by the provisioned speed, not the connection from the ONT.
3) Nonsesne. All ONTs support Ethernet connections. Alcatel 610 and 611 ONTs do not support MOCA. Here's a link to a list of various ONTs VZ uses and what they support: http://www.dslreports.com/faq/16637
4) Not true if the Actiontec is primary. It makes NO difference to the Actiontec if it's connection to the ONT is coax or cat5. Can be true IF you replace the Actiontec with your own router AND do not create a MOCA bridge for the ONTs. The following FAQ discusses various router configurations and the various trade-offs: http://www.dslreports.com/faq/16077
You can also make your request to switch from coax to cat5 at https://secure.dslreports.com/forum/vzdirect.
You will need to register and post your account information. Your post can only be seen you and VZ employees.
They handle cat5 requests all the time. They work normal business hours, so it may take a day or two if you post off hours.
The following FAQ will walk you through switching from coax to cat5.
When you are using the 3' cable are you disconnecting the rest of the coax network? I suspect your problem might be ingress.. disconnect all coax cable that are not connected to any thing else, and then make sure all of your connections are tight.
BTW the jelly inside the ethernet port is there to slow corrosion, you should leave it alone especially if you live near the ocean..