DLNA not working again on 40.20.1? (MI424WR Rev. I)
aforty
Enthusiast - Level 2

This again...

I can't get DLNA/AirPlay working for the life of me. Had the problem, as many of you did, with 4.19.36 but it was fixed by disabling IGMP Proxy (through http://192.168.1.1/index.cgi?active_page=6059). Now with 40.20.1 it again doesnt work and disabling IGMP Proxy has no effect at all.

 

Anyone else experiencing this? Anyone have anything I can try? I'm at a complete loss.

0 Likes
Re: DLNA not working again on 40.20.1? (MI424WR Rev. I)
aforty
Enthusiast - Level 2

Can anyone please help? Smiley Sad

0 Likes
Re: DLNA not working again on 40.20.1? (MI424WR Rev. I)
aforty
Enthusiast - Level 2

Jebus **bleep** christ, this again?! Can we have one **bleep** firmware upgrade where this works properly?

My AirPlay is not working, again. Unbelievable...

0 Likes
Re: DLNA not working again on 40.20.1? (MI424WR Rev. I)
smith6612
Community Leader
Community Leader

Try toggling UPnP on or off:


http://192.168.1.1/index.cgi?active_page=900

There's also a checkbox on the Rev. I somewhere, and I can't seem to search up where it is at the moment, labeled "Hardware Acceleration" under the network settings. If this box is unchecked it's been known to cause issues as well. See if you can locate that somewhere in the router and enable it.

EDIT: Found it. Go to the Network Connections page on the ActionTec (My Network > Network Connections) and select Network (Home/Office) Properties and it's associated edit button. You'll see something labeled "Bridge Hardware Acceleration."

Source: https://secure.dslreports.com/forum/r28351667-New-option-in-Actiontec-Rev-I-Bridge-Hardware-Accelera...

0 Likes