Receive up to $504 promo credit ($180 w/Welcome Unlimited, $360 w/ 5G Start, or $504 w/5G Do More, 5G Play More, 5G Get More or One Unlimited for iPhone plan (Welcome Unlimited and One Unlimited for iPhone plans can't be mixed w/other Unlimited plans; all lines on the account req'd on respective plans)) when you add a new smartphone line with your own 4G/5G smartphone on an eligible postpaid plan between 2/10/23 and 4/5/23. Promo credit applied over 36 months; promo credits end if eligibility requirements are no longer met.
$699.99 (128 GB only) device payment purchase or full retail purchase w/ new smartphone line on One Unlimited for iPhone (all lines on account req'd on plan), 5G Start, 5G Do More, 5G Play More or 5G Get More plan req'd. Less $699.99 promo credit applied over 36 mos.; promo credit ends if eligibility req’s are no longer met; 0% APR.
Just upgraded to Gigabit at my house and Verizon replaced my older equipment with a new ONT (Nokia G211M-C), Router (CR1000A), and Extender (E3200). Unfortunately, due to where some of these components needed to be placed, we're now getting inferior wired and wireless coverage around the house compared to our older setup.
I'm hoping to solve this problem with an additional piece of equipment as opposed to getting the house rewired for Ethernet (it's currently coax everywhere). Another E3200 Extender could help in the wifi department, but I'm not jazzed about spending another $200 just to be where I was before with much cheaper routers, and still not enough Ethernet ports to connect my devices.
I found two types of adapters in Verizon's store: the FNA for $55 and the MEA for $100. Both can connect via coax and have four Ethernet ports. (I don't have cable television so i don't need to worry about splitting coax). These wired connections would lessen the sting of decreased wifi.
What I don't understand is the difference between the two adapters. Verizon support said they would both be compatible with Gigabit, but couldn't offer much in way of which would be better. The MEA says it's MOCA 2.5, but has one port at 2.5, and the other three at 1.0. I think it's newer than the FNA, which is MOCA 2.0 but gives no info about the ports. How much do these things matter? Any ideas on what to go with?
I'd be connecting laptops and UHD tv components to the wired ports, if that helps.
MEA is one MoCA 2.5 to 2.5GbE and to a 4 port 1GbE switch.
FNA is one bonded MoCA 2.0 to a 5 port 1GbE switch.
For not introducing a bottleneck, I recommend to go with MEA.
I have been having serious connection issues with the Fios Network Adapter. I have been trying to find out if the MoCA would be a better fit for gaming on the Ps5 and streaming on PC. Have you been able to find anything out?
I know thos was posted a few months ago but this is the only thing I could find fmwhen I did a search.