Skip to main content
Accessibility Resource Center Skip to main content
Personal Business
Español

Choose your cart

Choose your cart

Have a phone you love? Get up to $500 when you bring your phone. OR get iPhone 13, on us for a limited time. With Select 5G Unlimited plans. Buy now
end of navigation menu
Ask a question
Correct answers are available for this post.
G3100 and G3200 using MoCA
murray978
Newbie
‎04-29-2020 11:21 AM

I have a G3100 connected to the ONT via ethernet and coax.  I am trying to get a G3200 extender working via MoCA.  Is this possible?  On the G3200 I get a solid yellow light on the front.  The Coax light on the back is solid green.  The coax line I am using works for Fios STB.  Any thoughts?  Thanks.

0 Likes
Reply
3 Replies
Correct answers are available for this post.
Re: G3100 and G3200 using MoCA
Edg1
Super User
Super User
‎04-29-2020 05:53 PM

Should be just plug and play. Try connecting the G3100 and E3200 directly to each other with a coax jumper. This will rule out possible wiring/splitter issues. 

0 Likes
Reply
Correct answers are available for this post.
Re: G3100 and G3200 using MoCA
MBNYM86
Newbie
‎07-03-2020 06:38 PM

Were you able to use the STB Coax connection and split it for the extender over coax?  or did you need to run a new cable?  Hopefully not.

0 Likes
Reply
Correct answers are available for this post.
Re: G3100 and G3200 using MoCA
charlyc
Enthusiast - Level 3
‎07-26-2020 07:23 AM

You should be able to use the included splitter so you can locate the E3200 extender anywhere you have a coax outlet even if you have a TV at the location. It should be plug and play but if you have any problems just reset by using a paperclip on the button in red on the back of the extender and wait until the light stops blinking and you get a solid white. 

0 Likes
Reply