How to open port for Actiontec GT704WG Rev B

[cuongcan]

I'm trying to open port 13008,16666, 10009 but i can't. I added 3 of them in Application Rule and checked with http://www.canyouseeme.org it said that "Error: I could not see your service on 98.108.xxx.xx on port (13008)
Reason: Connection refused". These ports are in Crossfire game.

Please help me, Sorry my bad English. ^_^

[Hubrisnxs]

When u set up the port forward make sure source port is any. Don't specify a number. Destination port you can define with a port number. Also go to www.portforward.con for step by step instructions

[cuongcan]

http://i161.photobucket.com/albums/t229/cuongcan2020/Untitled-22.jpg

If port is 13008 , which number should i fill in

Port Start ,Port End, Port Map Start

[teaser7]

I'm having the same issue with the same router.  I don't think port forwarding works with this router.  To answer to question, you fill in the port number you want under all three: Port Start ,Port End, Port Map Start

[dslr595148]

#1 In the router go to Advanced Setup

#2 The screen on the router may look something like the screen that you see at

http://screenshots.portforward.com/Westell/A90-750015-07/Advanced.htm

#3 Go to Universal Plug and Play (OR UPnP)

#4 If you do not have at least two special type types of computers that support UPnP where you can not define the ports that they use behind this router, turn off UPnP in the router.

A perfect example: game console(s)

By game console, a special type of computer with no keyboard or mouse (and it/they are usually connected to a TV).

#5 In the router at Advanced Setup, go to Private LAN

#6 What is the Starting and Ending IP Address?