- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Okay my modem model number is 6100. It says on the bottom of it that it's DSL2 + Router. How do I use it as a Router? I want to possibly the net on my Blu-ray Player, PSP.
Also on the back it says USB with a blue piece and the modem came with a blue cord for it. Exactly what is that for?
(Sadly I need to ask that you dumb down the answers while being precise)
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
@Lujah wrote:Okay my modem model number is 6100. It says on the bottom of it that it's DSL2 + Router. How do I use it as a Router? I want to possibly the net on my Blu-ray Player, PSP.
These are your choices:
#1 Go get your own RJ-45 WAN port router.
a) Then follow the info at
http://www.dslreports.com/faq/13600
b) If you have any questions about the FAQ, please ask. When asking, please tell if you are using the White and Blue OR the Red and Black Firmware.
#2 If you do not desire to get your own RJ-45 WAN port and then put their modem combo into bridge mode, then you could get a switch.
Just to clear since I know most routers have a built in switch, you could get a switch that is not part of a router.
a) To make it even easier to setup the switch, you could get an unmanged switch.
Such as the
http://www.staples.com/Linksys-EZXS55W-EtherFast-5-Port-10-100-Switch/product_430473
b) An example of a managed switch is the
http://www.staples.com/Cisco-SRW208-8-port-10-100-Ethernet-Switch-WebViewBR/product_684234
I am not saying that you should be buy their switch from staples OR what switch to buy. Those are only examples, period.
@Lujah wrote:Also on the back it says USB with a blue piece and the modem came with a blue cord for it. Exactly what is that for?
Ok.
b) According to Google Docs, there are 146 pages to that manaul / user's guide
c) Go to page 9 out of 146 pages.
d) Read what is required the two different connection types.
e) You are welcome to read the rest of it, to 27 page.
--
In that manual / user's guide they are talking about how to configure the White and Blue Firmware.
If you use the Red and Black Firmware, while I know your modem is the Westell 6100, the manual for the Westell 7500 will help.
#2 For the Red and Black firmware, since you have the Westell 6100, just skip over all of the hardware info. Unless you are usng Vista and want a USB connection and need to use USB drivers, go directly to page 31 out of 186 pages (otherwise, read page 30).
#3 Also skip all of the wireless screens/settings (from page 52 to page 69).
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are you planning on connecting your Blu-Ray player wirelessly? If so, the 6100 is not the box you need. If you want a one box solution, you need a 6100G or a 7500 instead of the 6100.
VZ is supposed to send new DSL customers a wireless DSL router as part of the start up package. Many VZ DSL customers get a 6100G or a 7500 from VZ.
If they sent you a 6100 instead, call them up and see if they wont send you something that provides wireless access.