Choose your cart
Choose your cart
Receive up to $504 promo credit ($180 w/Welcome Unlimited, $360 w/ 5G Start, or $504 w/5G Do More, 5G Play More, 5G Get More or One Unlimited for iPhone plan (Welcome Unlimited and One Unlimited for iPhone plans can't be mixed w/other Unlimited plans; all lines on the account req'd on respective plans)) when you add a new smartphone line with your own 4G/5G smartphone on an eligible postpaid plan between 2/10/23 and 4/5/23. Promo credit applied over 36 months; promo credits end if eligibility requirements are no longer met.
$699.99 (128 GB only) device payment purchase or full retail purchase w/ new smartphone line on One Unlimited for iPhone (all lines on account req'd on plan), 5G Start, 5G Do More, 5G Play More or 5G Get More plan req'd. Less $699.99 promo credit applied over 36 mos.; promo credit ends if eligibility req’s are no longer met; 0% APR.
I'm trying to get my Verizon DSL-2750B modem bridged with a ASUS RT-N66U Router. I have DSL/PPPoE service. IS this what I want the Verizon modem set at? Do I need to do anything else set on the Verizon 2750 Modem?
Also what port do I use on the ASUS router? Does the ethernet cable plug into the WAN port or one of the 4 LAN ports? I will post a picture of my ASUS router setup page in a few minutes.
Solved! Go to Correct Answer
The settings you're looking at should be correct. Connect one of the ports on your D-Link modem to the WAN/Internet port on the ASUS after bridging the D-Link, and from there the ASUS should be able to bring up the PPPoE session and hold your public IP. Just make sure you also disable the DHCP server on the D-Link so this doesn't confuse the ASUS if that router tries to auto-detect the connection settings.
Here is my ASUS router setup page.
Since I do not have that router I do not know for sure what else you have to do, but I can tell you this..
#1 Connect the WAN port of your ASUS to the Modem.
#2 And with most modem combos:
a) Must disable wireless (if not a wireless modem combo, N/A).
b) Must disable the DHCP Server in it.
The settings you're looking at should be correct. Connect one of the ports on your D-Link modem to the WAN/Internet port on the ASUS after bridging the D-Link, and from there the ASUS should be able to bring up the PPPoE session and hold your public IP. Just make sure you also disable the DHCP server on the D-Link so this doesn't confuse the ASUS if that router tries to auto-detect the connection settings.
This is a little off tangent to the original post but it seem the responders were quite knowledgeable. I have the DSL2750 and it keeps dropping the IP configuration. After reading this post I consdiered purchasing an external router and configuring the modem to Bridged. I looked at the Verizon setup at 192.168.1.1 and it appaers the DSL2750 is already setup as Bridged.
First is that correct as a stand alone modem/router and if it is setup as bridged, all I should have to do is disable DHCP and wireless and it should work. Am I correct?
As this thread is now over two years old, it will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.