Skip to main content
Accessibility Resource Center Skip to main content
Have a phone you love? Get up to $500 when you bring your phone.
end of navigation menu
Re: Router G3100 Port and port forwarding
GlockMan34
Enthusiast

How to add Port Forwarding Group of ports/protocols to your firewall:

First create a Port Forward Rule, go to Advanced/Security & Firewall/Port Forwarding Rule. Create a rule and add all the protocols/ports needed (e.g. L2TP) and save it. You'd think you could go to "Port Forwarding" and add it now but it doesn't show in the drop down list. Navigate to Advanced/Network Settings/Static NAT, create a rule adding your device, your public IP, select the check box "Enable Port Forwarding" then select the "Port Forwarding Rule" you created. It'll be on the drop down list. Apply your changes, navigate to Port Forwarding and you'll see a new Group rule was added. This worked perfectly for me to enable L2TP and all the protocols & ports it requires. I've attached some screen pics to help. Hope this helps, it was a pain to figure out. 

image

image

image

image

Re: Router G3100 Port and port forwarding
LawrenceC
Community Manager
Community Manager

As this thread is now over two years old, it will be locked in order to keep discussions current. If you have the same or a similar question/issue we invite you to start a new thread on the topic.

0 Likes