- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello.
I have a video baby monitor that transmits on a digital network and is interfering with my Verizon router. How can I configure my wireless router to transmit on channels other than the ones listed below?
Channel A: 2.410 GHz
Channel B: 2.441 GHz
Channel C: 2.468 GHz
Thank you.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
changing the broadcast channel is under Wireless, Basic Security Settings in router admin.
You have a choice of 1 - 11 or automatic, I have no idea what the frequencies are, maybe somebody else can help you with that or just try them 1 by 1 and see what works
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Wireless LAN in the Verizon Router should use one of the following channels. This is the frequency of each channel as well.
1, 6, 11.
1 is 2.412
6 is 2.437
11 is 2.462
These are referred to what are called non-overlapping channels. If you use anything in between you probably won't see much of a difference. In any case if you refer to the following link you can see what frequency each channel is at:
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Here is a link to a Wikipedia entry that shows all of the channel frequencies used for wi-fi:
http://en.wikipedia.org/wiki/List_of_WLAN_channels
Maybe this will help. although just taking a quick look it appears you may have trouble finding a channel dthat won't conflict. But of course you can try each channel, one at a time, and see if there is one that does not conflict with your specific setup.
Hope this helps.
__________________________________
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248