Skip to main content
Accessibility Resource Center Skip to main content
Personal Business
Español

Choose your cart

Choose your cart

Have a phone you love? Get up to $500 when you bring your phone. OR get iPhone 13, on us for a limited time. With Select 5G Unlimited plans. Buy now
end of navigation menu
Ask a question
Correct answers are available for this post. Jump to solution.
Ethernet-MoCa-STB
braveheart3158
Enthusiast - Level 1
‎06-16-2020 01:15 PM

Goal is to use my own router. Had the ONT switched from Coax (moca) to Ethernet that I ran to the back of the verizon router. From the verizon LAN port I connected to the ethernet port on an Actiontec ECB6200 MoCa. From the other side of the actiontec I connected the coax that goes to my digital set top verizon box. 
The Power and coax indicta=tor lights on the actiontec are green but the set top box says it does not have a signal. I reset the box but did not fix.

Please can someone help?

0 Likes
Reply
1 Solution

Correct answers
Correct answers are available for this post. Jump to solution.
Re: Ethernet-MoCa-STB
Edg1
Super User
Super User
‎06-16-2020 04:03 PM

 If using own router the configuration will be like this...

ONT > ethernet > router WAN

ONT > coax > cable splitter IN

  • OUT to set-top box 
  • OUT to ECB6200 

Router LAN to ECB6200

Both the STB and ECB6200 need to connect to the splitter. The set-top box can't be connected to the TV/STB OUT port because it doesn't pass MoCA.

View solution in original post

Reply
1 Reply
Correct answers are available for this post. Jump to solution.
Re: Ethernet-MoCa-STB
Edg1
Super User
Super User
‎06-16-2020 04:03 PM

 If using own router the configuration will be like this...

ONT > ethernet > router WAN

ONT > coax > cable splitter IN

  • OUT to set-top box 
  • OUT to ECB6200 

Router LAN to ECB6200

Both the STB and ECB6200 need to connect to the splitter. The set-top box can't be connected to the TV/STB OUT port because it doesn't pass MoCA.

Reply