I have a QIP2500-3 STB. My tv is a FHD2400, its a monitor by Gateway.
There is 2 other QIP25003 STB around the house. As welI, also get only sound and no video while using S-Video.
I've checked the wire, and there is current flowing but no signal.
Coax works fine, its only s-video and composite that does not work on all 3 of my STB.
I have tested the S-video and composite on my monitor with a DVD player and using the Wii. They work fine, its only the STB that does not display video on these ports.
The STB has displayed video through S-video and composite before. But that was before a black out that had occured.
After the blackout, S-Video and composite DID NOT work at all.
How do I get the STB to display video using those ports?
OR
Should I simply replace my STB?
Never had any issues with the S-Video or composite on my 2 2500's. Sounds like something may have fried during your blackout. I would attempt to get the boxes replaced or get a service call. I might also suggest adding surge protection to all the boxes (a UPS would be even better) if you don't have it already.
Start a new topic or ask questions in the open forum.
