I don't know if anyone else is having this problem right now but I get a notification that one of my cameras has detected motion and is recording, and then the message that the recording has stopped. When I go to the "Monitoring" tab and check there are no recordings. I hit the refresh icon but still no recordings. I found this on the help site: Computer From the Home Monitoring and Control Web site: Select Device Settings from the top navigation and click your camera to view the camera's settings: * Quality: Manage the quality (brightness, sharpness, resolutions) of your camera recordings * Motion Detection and Timeout: Specify motion detection sensitivity for different "areas" in your room. The more "sensitive" the setting is, the more likely the camera will detect and record small movements in the areas you specify to monitor. Timeout is the interval time between recordings. After recording for 30 seconds, the camera waits the specified timeout period (120 seconds is the default) before recording again. * Recordings: Update record settings to automatically record when audio or motion is detected and specify how long to save the recording. * Notifications: Edit how you are notified (via text message, phone or email) when a camera is activated. Tip: To change the phone number or email address associated with your notification settings, select Notifications from the top navigation and click Settings. I have a "Motion Detection" tab but there is no "Timeout" There is no "Recordings" tab. This use to work at least as of a few days ago. I just noticed it not working today. Anyone else having this problem?

Cameras Not Recording -- ANOTHER FREEKING DUPLICATE AFTER ERROR MESSAGE ABOUT HTML CODE!!!!

I don't know if anyone else is having this problem right now but I get a notification that one of my cameras has detected motion and is recording, and then the message that the recording has stopped. When I go to the "Monitoring" tab and check there are no recordings. I hit the refresh icon but still no recordings.

I found this on the help site:

Computer

From the Home Monitoring and Control Web site:

Select Device Settings from the top navigation and click your camera to view the camera's settings:

Quality: Manage the quality (brightness, sharpness, resolutions) of your camera recordings
Motion Detection and Timeout: Specify motion detection sensitivity for different "areas" in your room. The more "sensitive" the setting is, the more likely the camera will detect and record small movements in the areas you specify to monitor. Timeout is the interval time between recordings. After recording for 30 seconds, the camera waits the specified timeout period (120 seconds is the default) before recording again.
Recordings: Update record settings to automatically record when audio or motion is detected and specify how long to save the recording.
Notifications: Edit how you are notified (via text message, phone or email) when a camera is activated. Tip: To change the phone number or email address associated with your notification settings, select Notifications from the top navigation and click Settings.

I have a "Motion Detection" tab but there is no "Timeout"

There is no "Recordings" tab.

This use to work at least as of a few days ago. I just noticed it not working today.

Anyone else having this problem?

Accepted answers

tdm69

My recordings also just started showing up. I guess I'll close this out for now.

All comments

g8tor

I am having the same problem, recording has never worked for me, I have tried all of the things in troubleshooting. I also don't have the tabs about timeout or recordings.

g8tor

Just an update, my recordings started to show up now without any changes on my part.

tdm69

My recordings also just started showing up. I guess I'll close this out for now.

Bob4681

I am having similar issues with reliability of recordings. Maybe this should not have been closed. 😞

responsiblepsn

Y es this is what I asked because I open my door waiting a 19 seconds then walked in with out being recorded. That was after the person I believe is entering my apt said, She could get around a camera. So I talked with tech. They said no that's not so had me set up detection wider well its still not making a difference I'm getting a recording where I can see door handle move then nothing else.. Then the system is down

Joe1311

I am haivng similar issues and have had an open ticket for a month now with no resolution. What fixed your problems?

My monitor tab shows no recordings only a message that the server is temporarily unavailable please try again later. I find it hard to beleive the server has been unavailable for a month.

-Joe

Adam_VZ

Hi!

If anyone is still having issues with the Home Monitoring and Control system, you can reach support directly by calling 1-800-837-4966.

-adam

Joe1311

I have called that number about my issues and have been waiting a month on resolution. I have a ticket that was escalated a month ago. I still cannot see recordings and I am running out of patiences with Tech support.

Will cancel and sek reimbursement soon.

-Joe

KH-OrnEsh1

Joe13,

I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.