Child Item

Site Totals

61432 Questions Answered 270 Categories

Sensitivity

I'm having trouble with my fascinate phone, when I get a call I can't get the puzzle piece in the right spot fast enough before the caller hangs up.

I would like to know if anyone can tell me how to adjust the settings on the screen to make it more sensitive to my touching the screen ?

thanks,

Craig

Comments

VZW_Zrock02

The SCH-i500 does not contain an option to control touch sensitivity. With the Capacitive S-AMOLED display combined with hardware supporting multitouch, the touch sensitivity settings found in older devices are felt to not be needed.

In order to configure available settings, follow the steps below:

Press the Home Key
Press the Menu Key
Tap on Settings
Tap on Sound and display
Scroll down and tap on Haptic feedback
Note: If the options are not selectable, Silent mode should be disabled. The setting is located at the top of the menu.
Tap on Vibration intensity
Tap on the bar and slide it to the left or right to adjust intensity. When it is just right, tap Ok

Important Notice: The higher the level of vibration intensity values may cause a drop in battery performance. Should you notice this and becomes an impact to usability, try setting the values lower.

Indianchief

Are these instructions for the Fascinate? When I get to Sound and Settings, my phone either allow u to put a check mark in the box or take it out. There are no adjustments and the bars don't move left or right. Is my phone screwed up? Thanks

Rashid

I would like to know also, thanks for asking and now we shall wait..

Stein5830

If you have had your phone for a long time or have an ATK running (auto Task Killer) you can be ending some system important tasks that can cause your phone to hang when you turn it on. Delete your ATK if you have it. If not try a backup and restore the phone to factory settings. I have noticed that the phone is very sensitive for me and only rarely hangs up or lags on me.

Stein5830

@ indianchief and @ roachman55 there is no slider for sensitivity for the touch screen just for haptic feedback which will make the phone lightly vibrate when you do certain things. The total sensitivity depends on how good you are an pointing with your finger... just make sure you fingers are not excessively oily (i read over at XDA that this can cause tracking issues even if that doesn't make sense for the type of screen that it is) or dirty.

Rashid

Thanks Stein5830 I could not find what the VZW guy said to do it's not on Fascinate and like you said it's for vibrate when selecting different things.

Child Item