VZAccess Manager Installation Help Please!

[Nartural09]

Hello.

I have tried numerous times to install VZ Access Manager for my Mifi 2200 with no success.  I keep getting the 2738 error message.  I have tried to unregister and re-register both vbscript.dll and jscript.dll from the cmd window in both the System32 and SysWOW64 folder and I still can not install VZ Access manager.

I have a dell studio 15 laptop with Windows 7 & XP mode.  Can anyone help? 

Thanks!

[tmallon05]

did you ever resolve   been chasing this error myself  acer aspire one netbook and windows 7 startet

[Nartural09]

I have not been able to fix this problem.  I got an email from Verizon that the script error I am receiving is beyond the scope of their technical support.   They suggested I contact my PC manufacturer or Microsoft Tech Support so they can help me uninstall and reinstall the items that need troubleshooting.

[BDW]

I could never get my Dell Studio 15 to recognize my Pantech USB until after I updated the Dell's firmware. Don't know for sure that the firmware update was the fix, but that was the only major change I had made to the computer.

[lookinforanswer]

Try going to the command window and type

sfc /scannow

press enter.

[cathyw]

And then what? What is accomplished by this recommendation to scan? I have a windows 7 and cannot get VZ Access to download properly.

[lookinforanswer]

---

cathyw wrote:

And then what? What is accomplished by this recommendation to scan? I have a windows 7 and cannot get VZ Access to download properly.

---

What is accomplished is the command scans Windows 7 OS files to verify all is as it should be.  If not, it fixes them.  

Things happen with Windows Updates, Service Packs and other things to cause some files to be misplaced.

If the scan told you it didn't find any errors, then you are fine with the OS.  

If you visit the Dell Support site, they do have information in there regarding the issue of the MBB.  Not specifically the error but it may help.

This is a script error, there are two possible fixes that I am aware of.  

1. The registry must be fixed.

2. You need to make sure you have the latest version of Windows installer.

Will post more on the registry fix.

[lookinforanswer]

Error 2738. Could not access VBScript run time for custom action.

Cause

1. This error message indicates that the VBScript engine is not currently registered on the machine where the install/uninstall is taking place.
2. Resolution
3. The VBScript engine can be quickly registered by following these steps:
4. Run Command Prompt as administrator:
5. Start Menu -> All Programs -> Accessories
6. Right click on Command Prompt and select Run as administrator
7. Run the following command:
8. If you are using 32-bit version of Windows:
9. Type cd %windir%\system32 into the Command Prompt and hit Enter
10. If you are using 64-bit version of Windows:
11. Type cd %windir%\syswow64 into the Command Prompt and hit Enter
12. Type regsvr32 vbscript.dll into the Command Prompt and hit Enter.

If the above solution does not work, try the following alternative steps

1. If you are using 32-bit version of Windows:
2. Run Command Prompt as administrator:
3. Start Menu -> All Programs -> Accessories
4. Right click on Command Prompt and select Run as administrator
5. Type the following command in the prompt: reg delete "HKCU\SOFTWARE \Classes\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f, then hit Enter.
6. Next, you must also type the following command: c:\windows\system32\regsvr32 vbscript.dll, then hit Enter.
7. You should now be able to install your Nitro PDF software product.
8. If you are using 64-bit version of Windows:
9. Run Command Prompt as administrator:
10. Start Menu -> All Programs -> Accessories
11. Right click on Command Prompt and select Run as administrator
12. Type the following command in the prompt: reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\{B54F3741-5B07-11CF-A4B0-00AA004A55E8}" /f, then hit Enter.
13. Next, you must also type the following command: c:\windows\syswow64\regsvr32 vbscript.dll, then hit Enter.

This is what I've found on the error.  Be very careful when messing around in the registry.  Make sure to download the updated Installishield Windows Installer.

Hope this helps.

[lookinforanswer]

ATTENTION: IN ADDITION TO THE PREVIOUS POST

When you run the regsvr command, make sure that enable the UAC (User Access Controls) then restart so the changes will take

effect.

This ensures that you don't add the scripts to another registry, just the specified target.

[cathyw]

Did anyone ever get this worked out? I am likewise unable to get VZ Access to download on my Samsung Windows 7. Get error message. Frustrated.

[cathyw]

I ran the scannow and it did not solve the problem.

[jrr]

I need help in activating my wifi 2200 with Vzaccess manager.  I missplaced my quick reference guide

jrr

[Ambreezy]

Here are the steps to activating your wifi 2200 with VZ Access Manager.

To activate or update a PC card / USB modem it must be located within the Verizon Wireless network. Refer to the Coverage Locator for additional assistance.

1. Ensure that the PC card / USB modem is inserted into the computer.
   If using a notebook with an embedded module ensure the wireless radio is powered on.
2. Open VZAccess Manager.
   From the Windows desktop navigate: Start > Programs (All Programs) > VZAccess Manager
   From the Macintosh desktop navigate: Finder > Applications > VZAccess Manager
   From the Linux desktop navigate: Applications > Internet > VZAccess Manager. In SuSE click "Geeko" 
3.  > Applications > Internet > More Programs > VZAccess Manager
4. From the VZAccess Manager main screen, press Ctrl+D (Option+D Macintosh).
5. Enter 000000 (6 zeros) then click OK.
6. From the Activation screen, enter the following information then click OK.
   Activation may take a few moments.
   To locate the appropriate SID, refer to the NPA/NXX Search tool for assistance.

Activation Code

000000 (6 zeros)

Phone Number

10-digit mobile number

IMSI (International Mobile Station Identifier)

MIN (Mobile Identification Number)

SID

System Identification

Click OK.