DVR is not showing a program I deleted right away. A message on the DVR says I have to exit the DVR and go back in to see that the program has deleted. This DVR was replaced in 2023. This has been happening the last few weeks
I understand your concern about the deleted program not being reflected immediately on your DVR. It's frustrating when we delete something, but it takes a while for the change to register.
From my understanding of how these devices work, I would say that this is likely due to the way your DVR handles storage and deletion. Sometimes, the system might take a little extra time to update its records after deleting a program. This could be especially true if you have a large library of recordings or if your device has been experiencing some technical issues.
In any case, I would recommend trying to exit the DVR menu and then re-entering it to see if the deleted program shows up in the "Recently Deleted" section. If that doesn't work, you could try restarting your DVR to see if that resolves the issue.
I'm not aware of any specific settings or configurations that would affect this behavior, but I can assure you that it's not uncommon for these devices to have a slight delay when updating their records after deletion.
Let me know if you have any further questions or if there's anything else I can help with!
Start a new topic or ask questions in the open forum.
