Site Totals

61162 Questions Answered 267 Categories

How to install the dvr hd q1p6416-2 recorder

I need help to install this device. I got it today but I do not have a hd tv(NOT yet) but the old stb had a rf coax in and tv/vcr coac out but this stb has only a rf coax in. my tv does not have a himi input so do I have to purchase a s video which the tv does have to get this hooked up. You directions about this isn't very good for installation.

Comments

Joe01880

"so do I have to purchase a s video which the tv does have to get this hooked up."

Yes, also left and right audio cables if you have a stereo TV. If it is not stereo you will still need 1 audio cable.

chewbkka

Ok bought s video cable and audio cable from radio shack. now I hook everything up but instead of using the 3 or 4 channel I am using video 1 on my tv. Is this normal for using the s video. also I am getting a lot of background static on the picture. The audio cables I am using all three colors. should I be using white and red or whatever combo. I tried something on the tv audio but doesn't work. any suggestions?? Thanks

Keyboards

If you are using the S-Video cable DO NOT USE THE YELLOW WIRE FOR VIDEO. The S-Video cable provides the video feed and the red and white cables provide the audio. You have tied 2 different video outputs from the box together. Remove the yellow wire and I bet your noisy picture goes away. And yes, you should be on whatever video input the S-Video is on (varies from TV to TV but is often Video1).

chewbkka

thanks for the help. I remove the yellow cable but the background noise still was there. a low buzzing sound when they change pictures. anything else that would help. the noise was less when I remove the yellow cable

Child Item