Child Item

Site Totals

61260 Questions Answered 267 Categories

Weak Signal

Philips 30PW9110D/37

Always my tv show "Weak Signal". I tried to connect tv using fios setup box, dvd player, laptop, no luck. It does'nt come out of that mode. Is there anything wrong with the TV or tv is not getting good fios signal

===from philips manual===

WEAK SIGNAL message appears only in digital mode when the television received no incoming digital signal.

If you do not have digital signal, you will need to push the A/D button on remote to put TV into Analog mode.

I tried with no luck

Please suggest me.

Message Edited by horana on 07-26-2009 08:19 PM

Comments

Telcoguru

If the box is hooked up with a HDMI cable try switching to component cables to see if that works.

Keyboards

@horana wrote:
Philips 30PW9110D/37
Always my tv show "Weak Signal". I tried to connect tv using fios setup box, dvd player, laptop, no luck. It does'nt come out of that mode. Is there anything wrong with the TV or tv is not getting good fios signal
===from philips manual===
WEAK SIGNAL message appears only in digital mode when the television received no incoming digital signal.
If you do not have digital signal, you will need to push the A/D button on remote to put TV into Analog mode.
I tried with no luck
Please suggest me.
Message Edited by horana on 07-26-2009 08:19 PM

Based on your quote from the Phillips manual, this is an error for the tuner - analog vs. digital RF signal. It sounds like you aren't set to the correct input for the devices you are trying to use, but are set for the internal tuner (DVD and laptop typically don't have tuners.

Make sure that the TV is set for the input you are connected to.

Hubrisnxs

On the back of the TV where you physically plugged in your cables (the ones connecting your motorola box to the tv, that could be hdmi or component, or rca etc...) it will be labeled as to what it is .

On the back of my tv I have hdmi 1 and hdmi 2 and it is also labeled as component and stuff.

after you know what the input is labeled, then you can turn on your verizon box, make sure it's changing channels on the verizon tuner.

after you make sure your verizon tuner is changing channels, then do your inputs and match it up with that label that you read in the back, if you match it up and you're vz tuner is still moving and you still have weak signal then it could possibly be the cable that you are using (possibly hdmi )

Hubrisnxs

as an addendum, I have heard that the box may need a signal sent to it from tech support, if all those things add up, but I haven't had that problem myself.

horana

Hi All,

Thanks for the reply.

I tried below

a) ensured verizon setup box changes channels

b) connected to hdmi cable to hdmi (i have only one hdmi connector in @tv). Turned on setup box, tv, in that sequence. No luck

changed Analog to digital option in the tv remote, tried to change tv options like hdmi, front, composite, s-video, with no luck.

c) connected setup box composite cable to analog composite connection in tv. Tried swithching on both setup and tv, no luck

d) changed to digital connection in the tv. Switched on both setup box, tv.... no luck

e) removed hdmi cable from setup box, and connected to my laptop. switched on tv, and tried to bring monitor output to tv. still no luck

any other suggestions....

Advanced thanks

Horana

Child Item