I wanted to start a new thread here to try and narrow down the reason for the "Unable To Locate Hub" nag that I and many others are getting frome the MR DVR when watching a program. The Unable to Locate Hub nag happens only to people who are streaming a recorded program to a Hd receiver (not a Standard Receiver). My questions are simple....
1) Are you getting the nag?
2) What model is your Hd receiver?
3) Do you have new wiring? or did the installer use the coax that already exsisted in your house?
4) Do you have a direct connection to the splitter that Verizon installed?
5) When the nag comes up, does it also come up at the same time in another room?
6) Has anyone received the nag when watching a program on a Std receiver?
Answering any of these questions would be helpful. If you have anything to add that would be helpful also.
I am getting the nag now and again. It could happen in 15 mins or an hour. But it almost always happens in the course of an hours time.
The model HD receiver that verizon sent me is HDQ1P-6200-2.
I have new wiring up until the splitter...to each room the installer used the pre-exsisting wiring that was inside the house already.
I have direct connections to each box from the splitter.
I am testing to see if the nag comes up the same time in another room.
When I had a Std receiver I never received the nag.
I have no idea if answering these questions will help at all. But if we could narrow down the problem or when the nag comes up, maybe it will help fix the problem.
If you MR-Dvr is working and streaming to a HD receiver without getting the nag, please post and provide info about your set-up.
