Child Item

Site Totals

61215 Questions Answered 267 Categories

Reset my router and WiFi is GONE COMPLETELY!!!

I reset my Fios router with wireless using the reset button and after reboot wireless is completely gone and is no longer broadcasting a signal. I plugged my computer in through the ethernet connection and can access the internet but upon logging into the administrative function through http:\\192.168.1.1 i can no longer access the wireless settings.

I think the wireless card fried but i'm not sure.

Comments

hoaf

Additional Info: I am using an Actiontek MI424WR router provided by Verizon.

lasagna

Did you change the wifi SSID and perhaps after resetting the router it has now reverted to it's original name? You can find the SSID name by looking at the sticker on the bottom of the router or by logging into the router and going into the wireless settings page.

smith6612

What happens when you access the Wireless Settings page? Does the administration page hang or crash the router? It's a possibility the radio may have failed, but then there's a possibility the router needs a reset to factory defaults again or a bad firmware upgrade occurred sometime in the past.

Hubrisnxs

are you saying the wireless settings button is gone completely?

if that is the case then you should update the firmware and it will restore that wireless settings button

advanced and upgrade firmware.

prisaz

@hoaf wrote:
Additional Info: I am using an Actiontek MI424WR router provided by Verizon.

What hardware revision. REV. (Letter)

If it is a REV. A and it died, they would probably send you a new one if tech support can not resolve your issue. Regardless of what revision it is, if it is broke they will fix it. Try doing as suggested and if all else fails use the contact us link at the bottom of this page for tech support.

spacedebris

My friend at verizon just shot me a note saying that they had a problem with a recent firmware update.

Firmware versions 20.10.7 or 20.0.7.5 had a bad image and the routers automatically reverted to version 19. Version 19 does not have wireless ability, it only allows for wired connection so that the router can have the firmware upgraded properly. The routers should automatically update and the wireless should return within 10 minutes or so. But if the wireless does not return, then log into the router, go to advanced in the menu and "update firmware". Once the router has its firmware updated the wireless should start working again.

lisaev

@spacedebris wrote:
My friend at verizon just shot me a note saying that they had a problem with a recent firmware update.
Firmware versions 20.10.7 or 20.0.7.5 had a bad image and the routers automatically reverted to version 19. Version 19 does not have wireless ability, it only allows for wired connection so that the router can have the firmware upgraded properly. The routers should automatically update and the wireless should return within 10 minutes or so. But if the wireless does not return, then log into the router, go to advanced in the menu and "update firmware". Once the router has its firmware updated the wireless should start working again.

Hmmm can you please elaborate on that? Especially the firmware part?

Child Item